Yissum - Research Development Company of the Hebrew University posted this:Nanopatterned Surfaces for Triggered Delivery of Biologically Active MoleculesNanopatterned Surfaces for Triggered Delivery of Biologically Active Molecules Project ID : 12-2018-5686
Yissum - Research Development Company of the Hebrew University posted this:Germanium-based Precursors with High Water SolubilityDeveloped a germanium-based precursor with hydrogen peroxide to obtain a stable and reactive germanium-oxide precursor that is soluble at a concentration 20x as high as classically-prepared GeOx (aq) Project ID : 9-2018-6695
Jerzy Morgiel posted this:
Scientist at Institute of Metallurgy and Materials Science, Polish Academy of Sciences
Technology Transfer OfficeView Profile
Center for Technology Transfer and Commercialization of Novosibirsk State University posted this:New class of computing devices with memory based on graphene nanocompositesModels of mem-capacitors - computing devices with memory based on graphene nanocomposites are developed in the laboratory of the university (Russia). This class of devices has an architecture with significantly greater speed and lower power consumption compared to traditional ones. It allows avoiding the memory-processor bandwidth problem of the device. The laboratory is looking for partners for technical cooperation, licensing or commercial agreements with technical assistance.
Graft Polymer UK Ltd posted this:Project: Innovative pilot production modified compounds by PE125 standard for multifunctional applications.Producing PE125 using GRAFTALEN™ MP-UHHD. Consumer properties, which should be taken into consideration: 1) The unique toughness of the material (the highest rate of all known polymers), namely, Over 160 kJ/m2 2) High abrasion resistance 3) Low friction coefficient (self-lubricating) 4) High resistance to chemically aggressive reagents (media) 5) High creep resistance (geometric stability) Ordinary way - This type of process is quite expensive. Production of PE125, in compounding with bimodal PE100, from 8 to 45% of supermolecular polyethylene is injected, reaching dispersion by multiple compounding (4 stages) in an extruder cascade (XXXXX technology). GRAFTALEN™ MP-UHHD (alloy) is a MELT-PROCESSABLE concentrate of UHMWPE on an HDPE matrix. As HDPE, you can choose the most affordable HDPE (pipe) grade. To obtain polyethylene according to the standards PE125 (with a minimum strength indicator MRS> 13.8-14 MPa, in comparison PE100 has MRS only 10 MPa), a significant improvement in the resistance against hydrostatic pressure is required. For a conventional bimodal HDPE, this indicator is difficult to achieve, since it directly correlates with the impact strength/density indicators and with simple extrapolation, it turns out that the required indicator for PE125 simply does not reach the bimodal HDPE matrix. Another problem - the difficulty in maintaining the geometric stability of the pipe (the thickness at the top of the pipe is often less than at the bottom) due to the sagging effect (the phenomenon of the gravitational flow of a polymer melt). This phenomenon is more pronounced for thick-walled pipes. The specific blend of HDPE with UHMWPE allows solving these problems above.
Mansour Esmaeil Zaei posted this:
Technology Broker at Technology Transfer Centre, University of Warsaw (UOTT UW)
ADVANCED PASSIVE TECHNOLOGY posted this:
Ilythia Morley posted this:
Intern - Commercialization Team at Korea Institute of Energy Research
Yissum - Research Development Company of the Hebrew University posted this:Anti-Infectious Coating for Dental ImplantsSelf-assembly of fluorine-capped moieties for prevention of biofilms Keywords: self-assembly, dental, dentistry, biolfilm, disruption Project ID : 9-2015-3142
Yissum - Research Development Company of the Hebrew University posted this:Hydro-Printing Conductive Patterns onto 3D StructuresTransfer process based on dissolved film with conductive pattern in water bath. Keywords: hydroprinting, conductive structures, three-dimensional, low tech Project ID : 9-2016-4364
Yissum - Research Development Company of the Hebrew University posted this:Gas Phase Superoxide Radicals for Soil RemediationCluster2 This project is a composition of reagents for in situ chemical remediation of contaminated soils based on gas phase superoxide radicals Project ID : 15-2018-4561
Yissum - Research Development Company of the Hebrew University posted this:Quantum Nano Materials for Photo-Catalytic ApplicationsComposition of metal-semiconductor nanoparticles for the generation of reactive species (radicals, peroxides) in solution. This project covers different embodiments that have other researchers involved on different subsets (therapeutics, photoinitiators). For example, there is a biological aspect, whereby a biological assay is a result of a pathway started with reactive species generation. Project ID : 9-2015-3191
Laser Consult Ltd. posted this:Explosive cladding for the electrical industryA Hungarian company with the know-how of explosive cladding of two different materials for manufacturing electrical components. The company is seeking to find companies with cooperative intents from the electrical appliance or vehicle industry.
Yissum - Research Development Company of the Hebrew University posted this:Innovative Phase Change Materials for Thermal Energy StoragePre-filing Nov. 2016 Project ID : 9-2016-4371