Innovations in Electronics Related Market | Innoget

Innovations in Electronics Related Market | Innoget

By Type

Yissum - Research Development Company of the Hebrew University posted this:

Fast, Room Temperature Single Pass Readout of NV-center Spin State in Diamond Fast, Room Temperature Single Pass Readout of NV-center Spin State in Diamond Project ID : 14-2019-6698

Daniel M. Vasconcelos posted this:
Intellectual Property Manager at INESC TEC

C4Mir - Control module for multiple mixed-signal resources management An innovative and patented technology for mixed-signal testing and measurement for long-term sensor-based monitoring and I2C or I3C based solutions. C4Mir module and method of operation can be used for initialization, measurement, and resource management through mixed-signal analog bus scheduling, synchronization and group addressing for built-in calibration strategies for example.

C4Mir - Control module for multiple mixed-signal resources management

Yissum - Research Development Company of the Hebrew University posted this:

Thick optical crystals for optical parametric amplifiers (original title of project: Optical Parametric Amplifier with Large Aperture) The invention: • Diffusion bonded periodically poled crystals can increase the effective crystal aperture with high gain and good beam profile • (Method to tune crystal materials to optically amplify light signals) Project ID : 14-2018-5685

Yissum - Research Development Company of the Hebrew University posted this:

Germanium-based Precursors with High Water Solubility Developed a germanium-based precursor with hydrogen peroxide to obtain a stable and reactive germanium-oxide precursor that is soluble at a concentration 20x as high as classically-prepared GeOx (aq) Project ID : 9-2018-6695

Yissum - Research Development Company of the Hebrew University posted this:

Hydro-Printing Conductive Patterns onto 3D Structures Transfer process based on dissolved film with conductive pattern in water bath. Keywords: hydroprinting, conductive structures, three-dimensional, low tech Project ID : 9-2016-4364

Hydro-Printing Conductive Patterns onto 3D Structures

Yissum - Research Development Company of the Hebrew University posted this:

Quantum Nano Materials for Photo-Catalytic Applications Composition of metal-semiconductor nanoparticles for the generation of reactive species (radicals, peroxides) in solution. This project covers different embodiments that have other researchers involved on different subsets (therapeutics, photoinitiators). For example, there is a biological aspect, whereby a biological assay is a result of a pathway started with reactive species generation. Project ID : 9-2015-3191

Quantum Nano Materials for Photo-Catalytic Applications

Laser Consult Ltd. posted this:

Explosive cladding for the electrical industry A Hungarian company with the know-how of explosive cladding of two different materials for manufacturing electrical components. The company is seeking to find companies with cooperative intents from the electrical appliance or vehicle industry.

Explosive cladding for the electrical industry

Alexander Kvashnin posted this:
Director at Center for Technology Transfer and Commercialization of Novosibirsk State University

Electronic application for diagnosis, restoration and development of speech University (Novosibirsk) has developed electronic applications for diagnosis, development and correction of speech in clinics or at home. Previously non-automated methods of forming speaking skills are brought to the modern technology level. Applications allows you to reduce the workload and some staff requirements, increase the number of patients and accelerate the recovery period. Authors are looking for partners to prepare a commercial version of the application and bring it to the market.

Center for Technology Transfer and Commercialization of Novosibirsk State University posted this:

Plasma sensors for ultra-small concentrations of chemicals Plasmon sensors of ultra-small concentrations of chemical substances have been developed in the laboratory of the University (Russia). The sensors are used in medicine, pharmaceuticals, safety systems and R&D to improve the sensitivity of IR spectroscopy devices. The detector installed in the system enables to increase 100-10000 detectability for a wide range of organic and inorganic substances. The authors are looking for partners for commercial agreements and technological cooperation.

Yissum - Research Development Company of the Hebrew University posted this:

Chip-Scale Atomic Clock for Frequency, Wavelength, and Time Referencing Applications This is targeted as a spinout but also could be an R&O. Project ID : 43-2018-4622

Chip-Scale Atomic Clock for Frequency, Wavelength, and Time Referencing Applications

Yissum - Research Development Company of the Hebrew University posted this:

Rubidium Lead Chloride Perovskite Materials for Photovoltaics Rubidium Lead Chloride Perovskite Materials for Photovoltaics Project ID : 9-2017-4470

Rubidium Lead Chloride Perovskite Materials for Photovoltaics

Yissum - Research Development Company of the Hebrew University posted this:

Colloidal Semiconductor Nanorods core-island-shell nanocrystals Project ID : 14-2018-4648

Yissum - Research Development Company of the Hebrew University posted this:

3D Printing of 100% Wood and Wood Plastic Composites 3D Printing of 100% Wood and Wood Plastic Composites Project ID : 9-2018-4541

3D Printing of 100% Wood and Wood Plastic Composites

Liviu Giurca posted this:
CEO at Hibridesign

New Aerial Transport System – ATS proposes implementing a new and innovative concept on dynamically charging electrical aircraft -EA aiming at reducing Greenhouse gases and other emissions affecting the society as a whole.Dynamically charging Electrical Aircraft refers to power transfer between the charging infrastructure and the vehicle while the vehicle is moving. Plug-in systems have some inherent issues that hinder the wide adoption of electric aircraft EA. A major obstacle is the time needed to recharge the batteries. Typically, recharging lasts for several hours when using low voltage and amperage power outlets, which limits the usage of EA. Dynamic charging aims at alleviating some of these issues thus easing the path towards large-scale adoption of aerial electromobility. In principle, dynamic charging solution allows power to be continuously supplied to the vehicle from an external source, thus enabling a significant reduction of the on-board battery size and, at the same time, reducing virtually to zero the time the vehicle needs to stop for the recharging operations and the related range anxiety. The reduction in battery size allows a lighter vehicle to be realized in comparison to other EA. A reduction is therefore expected in terms of energy required for traction and related CO2 emissions. In addition, CO2 emissions related to the energy required for the production of the battery should also benefit from a reduction of the size of the on-board pack.

New Aerial Transport System – ATS proposes implementing a new and innovative concept on dynamically charging electrical aircraft -EA aiming at reducing Greenhouse gases and other emissions affecting the society as a whole.

Maria João Cardoso posted this:
Science and Technology Manager at UATEC - Unidade de Transferência de Tecnologia

Passive sensor system powered by wireless power transmission Network of wireless and passive sensors (without batteries), using a set of unique sensors which use a frequency for the data transfer (obtained by sensors) and another frequency for the reception of energy that is emitted by transmitters that power the sensors. For this, only a central data reception and wireless transmission structure is required which communicates with each of the sensors independently. These sensors have lower power consumption and higher data rates (up to 960 Mb/s).

Passive sensor system powered by wireless power transmission

1
2
3
4
5