Germán Cabañero posted this:
HEAD OF STRATEGIC PARTNERSHIP at CIDETEC
Daniel M. Vasconcelos posted this:
Intellectual Property Manager at INESC TEC
Jerzy Morgiel posted this:
Scientist at Institute of Metallurgy and Materials Science, Polish Academy of Sciences
Universidad de Alcalá-OTRI posted this:Altimeter based on radar, inertial and atmospheric pressure systems for aerial, acrobatic and unmanned vehicles.The Intelligent Systems Research Group of the University of Alcalá presents an altimeter based on radar, inertial and atmospheric pressure systems for aerial, acrobatic and unmanned vehicles. It is a sensor capable of measuring height with respect to the ground integrating radar, barometric and inertial technologies. The group seeks to achieve licensing, collaboration or commercial agreements with technical assistance, with companies or research groups related to the aeronautical and aerospace sector.
UNIVERSIDAD DE ALICANTE posted this:Novel and simple procedure for dispersing graphene derivatives in chemically curable resins.The Laboratory of Adhesion and Adhesives of the University of Alicante and the company Dental Global Training, have developed a new procedure to incorporate efficiently graphene derivatives (nanofibers, nanosheets, nanoparticles) in chemically cured resins by using an in situ polymerization technique. The method is very simple and fast, it provides an excellent dispersion of the graphene derivatives in both the solid components of the resin and in the cured polymer matrix, and is entirely friendly with the environment. The novel method does not require the use of organic solvents nor water, ultrasounds, and high pressure/temperature. The resulting resin composites show excellent mechanical properties, good wear resistance, easy manipulation and increase the insolubility in oral fluids, and therefor they have special interest in applications in odontology, traumatology and non-medical applications too (automobile, construction, civil engineering, aeronautics, space engineering, electronics and optics). It is looking for companies interested in acquiring this technology for its commercial exploitation.
Universidad de Alcalá-OTRI posted this:New technology for Air Traffic Management.A research group from a Spaniard university has designed a new system based on optimal control technology for Air Traffic Management (ATM). The new approach is mainly characterized by its adaptability capacity in situations where there are more than two aircrafts. Potential collaborations with international/national research centres and companies interested in applying the technology are sought.
UATEC - Unidade de Transferência de Tecnologia posted this:3D printer for the in-situ building of habitable modules with a raw mixture of binders and the soil of MarsA student of the University of Aveiro did the “spin-in” of an invention that started to be developed with the collaboration of teachers and investigators of several departments. The invention, that’s been arising interest in the business sector, locally and nationally, aims at the production of habitable modules using the soil in inhospitable locations, and it was specifically thought for Mars. The advantages of this process are the total automation, and it distinguishes itself from other solutions proposed until now for providing a closed construction, airtight, with total habitability, safe against cosmic radiation with other devices, and the possibility of holding distinctive functions. He University is looking for partners that may be interested in financing the development of this tool.
UATEC - Unidade de Transferência de Tecnologia posted this:Manufacturing method of metal foams and porous metals metal matrix nanocomposites with nanometric dispersoids uniformly distributed and their uses (vehicle applications, houses, machinery, equipment and devices with superior performance)A group of researchers from a Portuguese university developed an innovative method for manufacturing a new generation of closed-cell metal foams reinforced with nanodispersoids combining the powder technology method with colloidal processing. The invention respects to a product with excellent energy absorption capacity to impact and sound damping for vehicle applications, houses, machinery, equipment and devices with superior performance.
UNIVERSIDAD DE ALICANTE posted this:Control system that allows drones to flight autonomouslyResearchers from the University of Alicante have developed a control system, which allows a greater versatility in flight for UAVs (Unmanned Aerial Vehicles also colloquially called drones). With this system a vehicle can switch between different flight plans or define in real time the optimum aircraft movement depending on the environment and the information received by its sensors. Moreover, this system also includes a communication mechanism that allows a ground station to define new flight plans while the aircraft is in the air. This system is a significant advance over existing systems, as latter ones require prior planning to take off and have a reduced flexibility when the vehicles are in flight. It is applicable to all types of aircraft using the communication protocol MAVLINK.
Fundació URV posted this:New device and method to detect the temperature remotelyThe technology allows to detect the temperature remotely using the emission of light by nanoparticles of a luminescent material doped with lanthanide ions (Yb+3, Er+3, Tm+3 and HO+3, among others) deposited on the object to find its temperature. Excitation with infrared radiation of these luminescent particles produces light emission in different regions of the visible light collected by a sensor to obtain an intensity ratio.
Universidad de Alcalá-OTRI posted this:New technology for generating 4D-trajectories in aircrafts using dynamics and location information.A research group from a Spanish University has designed and implemented a new system based on a technology able to perform optimal navigation planning in aircrafts. The new approach is mainly characterized by its autonomously learning capacity and adaptability to changes in the dynamics of the platform and environment. Potential collaborations with international/national research centres and companies interested in applying the technology are sought.
Universidad de Alcalá-OTRI posted this:Portable device to measure the displacement maps on surfaces in the three spatial directionsA Spanish research group from the Department of Signal Theory and Communications of the University of Alcalá along with a Spanish research group from the Department of Mechanical and Mining Engineering of the University of Jaén has developed a portable optoelectronic device to measure the displacement of each surface element in an object when is subjected to deformation. In particular, the device allows obtaining maps of long range displacement (greater than mm) in dynamic regime (in real time). Thus this system is very useful in the experimental study of the materials’ mechanical properties, especially if they suffer large deformations at high speed. It is a computationally simpler alternative and more inexpensive than the digital mapping technique for 3D images which is currently the only one allowing such measures. The group seeks licensing agreements, collaborative and commercial agreements with technical assistance.
UATEC - Unidade de Transferência de Tecnologia posted this:Planar diamond thermistors for harsh environments: applied to temperature measurements in combustion and jet engines for the automobile and aerospace industry, lasers, fuel cells and in biological and aggressive chemical environmentsThe new diamond thermistors can be used for temperature measurements in harsh environments such as aggressive chemicals at high temperature or in biological media due to their inertness. Furthermore, the sintered ceramic substrate guarantees superior adhesion and resistance to fracture under high mechanical loads. The fabricated temperature sensitive diamond surface comprises well adhered ohmic contacts deposited on the backside of the dielectric ceramic substrate. This configuration prevents interaction between the temperature sensitive surface and the surrounding environment which is essential for biochemical devices applications. Furthermore, the planar geometry of the disclosed thermistor maximizes the contact region between the temperature sensitive surface and any solid flat surface on which it is placed. In this way, improved response times are obtained comparing to traditional round shaped thermistors.