Find the latest Innovations, Patents and Knowhow in Energy, Nuclear Energy, Nuclear Fusion, Thermal Energy, Nuclear Fission, Electrical Energy and Clean Energy
Technology Transfer Office
UNIVERSIDAD DE BURGOS posted this:Polymer Conductor with properties according to your needsThe University of Burgos has developed a new solid electrical conductive polymer material, preferably as film or coating, using non-conductive polymers. This material can be used in the production of resistive or conductive sensors for substances of interest, both in gas phase and in solution, or for use in electrical and electronic systems.
Laser Consult Ltd. posted this:Vertical axis wind turbine for slow and changing wind speedOne of our partner company active in the fields of construction, trade and services has developed a solution to accelerate and regulate the wind speed to handle low wind speed and high wind gusts. The presented product is in the capacity range where other vertical axis wind turbines (VAWTs) are however its energy production is more effective. The Hungarian firm is looking for industrial partners interested in licence agreement.
LYDIA BARES LOPEZ posted this:
Innovation Manager at UNIVERSITY OF CADIZ
Energy & Waste posted this:Biolimp-MPdry. Technology for biogas cleaningBiogas is a dirty gas. Therefore, it requires a previous cleaning to be used as biofuel. There are many components to be removing, among them, water vapor, siloxane, halogenated hydrocarbons and H2S, all of them, affects the good performance of the CHP system. The Biolimp-MPdry technology is a multipropose technology that allows the biogas cleaning with a very lower costs and high performace yield.
Energy & Waste posted this:Biogas dryer. For biogas water vapor removingBiolimp-Dry technology combines the cooling and condensation techniques, allowing to achieve elimination efficiency of over 95% depending on the working temperature with low operating costs. This can include a washer-recuperator, which in addition to minimizing the energy needs of the operation, allows to wash the biogas with its own condensates, which produces a partial reduction of the H2S and NH3, that accompany the biogas, reason why it can be considered a multipurpose technology.
Universidad de Alcalá-OTRI posted this:GEISER Research Group and its Power Electronic LabThe Group of Electronic Engineering Applied to Renewable Energy Systems of Alcalá University (GEISER) presents the Power Electronics Research Lab, as a place to Research and Development, equipped with all of the tools and instrumentation necessary for the development of power electronic systems. That includes: - Yokogawa oscilloscopes - Power analyzer and data loggers - a dSPACE system - a Regatron Full 4-quadrant grid simulator and - ADS AC/DC electronic loads ....among others.
Benemérita Universidad Autónoma de Puebla posted this:PHOTOVOLTAIC CELL OF HIGH SOLAR CONCENTRATION USING A POWER TRANSISTOR AS AN ELEMENT FOR CONVERTING ENERGYThe present invention provides a photovoltaic cell of high solar concentration, as well as a system for generating energy from the solar concentration. The cell consists in a power transistor of the MJ15023 type, a ring-shaped aluminum base, a glass bell, a rubber ring for sealing purposes and an aluminum base.
University of Huelva posted this:Synchronized exchange energy method and device between users of the electric grid for decentralized managementThe method comprises defining fragments of energy to be demanded at given time intervals by consumers of the electrical network, negotiating their purchase with providers or other users capable of bidding, synchronizing production and consumption, and storaging or providing the difference between the negotiated fragment and the amount of energy actually demanded or suplyed with zero-impact on the grid
University of Huelva posted this:New procedure for the purification of water contaminated by metals and the respective systemsThe invention solves the problems of inefficiency which usually shows the conventional passive treatment systems. The reactive fills developed for the removal of inorganic contaminants historically have focused on removing low concentrations of these (typical features of coal mining), however when these fillers are faced to high concentrations of metals (sulfur mining, uranium, industrial water waste…) quickly clogging and loss of reactivity occurs. The present invention allows the removal of metals without clogging and/or loss of reactivity. This is achieved by the use of a coarse inert material with high surface mixed with a fine-grained reactive material, so that the surface of the inert material is breaded with reactive material. Coarse fragments of inert material act as a frame, providing large pores that reduces clogging by precipitates. The small particle size of the reactive material provides a large surface area that increases its reactivity.
University of Huelva posted this:New power generation electric systemThe proposed system is characterized by the following aspects which make it unique: 1- The system is built from a number of PEM fuel cells, supplied by al least one hydrogen source. Each module include a monitoring and control subsystem, so it is possible to activate/deactivate module induividually. 2- Each module can supply a different power value. 3- The monitoring and control subsystem receives electrical signal from each modules like stack voltage, stack current and cell voltage. 4- The monitoring and control system has two levels: the first level aims to control each module (local control) and the second level is responsible for coordinate local controller. 5- The monitoring and control system is on-line accessible. 6- The control and monitoring system distributes homogeneously the operating hours between the modules when the power demand is lower than the maximum power. 7- Each module has a oxygenation/cooling subsystem which supplies oxygen to cathide and air for refrigerate the stack. 8- Each module has a hydrogen subsystem wich is the responsible for hydrogen delivery to stack at ambient pressure. 9- The hydrogen subsystem include a hydrogen purge line. 10- The Electric Power Generation System includes a simulator to reproduce the performance ogf the whole subsystem.
University of Huelva posted this:Procedure for obtaining a renewable resource of metals from acid minewater, and the respective systemsIs known in the state of the art the recovery of metals from the acid aqueous solution that contain them, generally by liquid-liquid extractions. For metals recovery at industrial scale is necessary that these metals can be recovered simultaneously by means of a single extraction step. There are several extraction reagent for this purpose, all these reagent are very expensive and the industrial process for the metal recovery (particularly for rare earth and yttrium) are very complex and finally expensive. The present procedure allows to recovery selectively metals (particularly rare earths and yttrium) by the neutralization of acid mine waters. The objective is to revalue the metal content dissolved in this waters.
University of Huelva posted this:New method for manufacturing magnetic cores by powder metallurgyMagnetic cores in amorphous state are usually produced by placing together very thin amorphous ribbons from a material obtained by the melt-spinning technique. The new patented method produces the amorphous material by mechanical alloying, a traditional process in the powder metallurgy field. This technique allows a higher control on the amorphisation process and the properties of the amorphous obtained powders. These powders are then consolidated by the very quick process known as Electrical Resistance Sintering (also Electrical Discharge Consolidation/Sintering can be used). A final amorphous material, without the typical frontier between ribbons of melt spinned materials, which clearly affect properties, is obtained.
Research & Technology Organization
UNIVERSIDAD DE ALICANTE posted this:Production of briquettes for energy recovery of furniture waste with polyurethane foamsThe Research Group "Waste, energy, environment and nanotechnology" (WEEN) from the University of Alicante has developed a new compact material and a production process of briquettes of furniture waste. This process makes it possible to carry out the management and the energy recovery of this waste, avoiding the environmental problems associated with its landfilling and also making it easier to transport, handle and store. The briquettes obtained, show physicochemical characteristics similar to the conventional and they have a high energy density being able to be used as fuel for thermal power plants or industrial boilers. Companies in the waste treatment sector and the furniture industry that are interested in commercial exploitation of this technology through licensing agreements and / or technical cooperation are sought.
Alexander Kvashnin posted this:
Innovation Manager at Institute of Computational Technologies, Siberian Branch of Russian Academy of Science
UATEC - Unidade de Transferência de Tecnologia posted this:Process for converting waste, effluents and organic by-products in recyclable materialsA group of researchers from a Portuguese university has developed a biological process to treat waste, effluents and organic by-products with industrial origin characterized by high biodegradability that adds value to conventional biological treatment processes, integrating their assumptions on the concept of biorefinery. The invention aims to reduce by 96% the organic matter content of the starting substrate allowing generally meet the discharge criteria set out in the legislation.