Technology Offers Site map description
H
Fundació URV posted this:
Hidracot, Organic Matter Removal (CatalyticAdvanced Oxidation, COD < 5.000 ppm)Catalytic Advanced Oxidation technology removes the organic matter at atmospheric pressure and mild reaction temperatures (< 60 ºC) getting clean and reusable water. It is a simple process that uses very mild operating conditions and does not require complex systems. It is a clean technology, and does not generate waste or by-products, with low power consumption and small space requirements compared to biological treatments. The organic pollutants are oxidized to CO2 gas obtaining conversion values around 99%.
Gerard SisóUniversitat Autonoma de BarcelonaGerard SisóGEMMA-CIMITEC Group Research and Innovation Promoter at Universitat Autonoma de Barcelona
View ProfileGerard Sisó posted this:
High capacity electromagnetic encoders for motion control applications and near-field Chipless-RFID systemElectromagnetic encoders, based on a static transmission line working at microwave circuits and a movable chain of metallic or dielectric inclusions, constitute a good alternative to the well-known optical encoders. Optic systems present very good spatial resolution, but they exhibit a limited robustness for operation under harsh/hostile conditions, or in environments subjected to pollution or dirtiness, such as those encountered in many industrial scenarios. Magnetic encoders and Hall-effect sensors are also of interest for motion control, but such sensors are based on inductive elements or magnets, thereby representing a higher cost solution, as compared to electromagnetic encoders. Additionally, electromagnetic encoders can be used as Chipless RadioFrequency IDentification (RFID) tags. Namely, a certain identification code can be provided to the chain of inclusions. Near-field Chipless-RFID systems are of interest in Smart Packaging and logistics applications.
GEMMA-CIMITEC Group Research and Innovation Promoter at Universitat Autonoma de Barcelona
Maria João CardosoInstituto de TelecomunicaçõesMaria João CardosoIntellectual Property and Technology Manager at Instituto de Telecomunicações
View ProfileMaria João Cardoso posted this:
High capacity photonic beamforming for phased antennasPhased array antennas are suitable for massive MIMO wireless communications, of which 5G and satellite communications are paradigmatic examples. These 3 patent families propose a photonic beamforming system that is able to process a large number of RF signals with a very broad bandwidth, something that cannot be done with digital processors. The proposed photonic beamformer is thus a key enabler for broadband massive MIMO wireless communications.
Intellectual Property and Technology Manager at Instituto de Telecomunicações
Hussein IbrahimJazan UniversityHussein IbrahimInventor,Business Developer Manager at Jazan University
Hussein Ibrahim posted this:
High Cooling Inducer Air conditionA Water condition contains tow upper and lower rooms separated by a perforated barrier to pass water from top to bottom,with a turbo fan in the lower tank (Water Tank ). The fan pulls the air from the outside through the water flowing from top to Bottom .The Heat Exchange is expelled to the outside via controllable out let,the water conditioner also contains cardboard that can be installed in the barrier.
Inventor,Business Developer Manager at Jazan University
Max-Planck-Innovation GmbHMax-Planck-Innovation GmbHMax-Planck-Innovation GmbH posted this:
High Ferroelectricity: First Method for Production of Bulk SnTiO3The invention presents the first scalable method for producing bulk SnTiO3, a material with remarkable ferroelectric properties. Previously limited to thin films due to the instability of tin(II) oxide at high temperatures, this method circumvents these limitations, enabling industrial-scale synthesis. The new process produces high-purity SnTiO3 with unique crystalline structures, expanding its applicability across ferroelectric, piezoelectric, and electro-optical devices. This breakthrough facilitates the development of advanced electronics such as FeRAM, tunable capacitors, and precision actuators, marking a significant advancement in materials science and technology.
Steinbeis Centre for Technology Transfer IndiaSteinbeis Centre for Technology Transfer IndiaSteinbeis Centre for Technology Transfer India posted this:
High Performance Hybrid Composite MaterialsThe technology has been developed to for making hybrid composite materials as an alternative to timber , synthetic wood and plastics. Uniqueness of the technology / product:- > Stronger than teak wood, timber, synthetic wood & plastic > Durable & Customized products can be made > Resistance to moisture, corrosion, termite & fungus > Fire's self- extinguishing nature > Cost effective & maintenance free > Alternative for teak wood & avoid deforestation
Markus RemmJenoptik Automotive North AmericaMarkus Remm posted this:
High precision High speed Robotic Laser cutting for Metals and PlasticsUsing a patented robot encapsulated Beam guide system Jenoptik can offer robot laser cutting of 3D Metal and Plastic parts. High accessibility due to the fact that there is no external beam delivery (e.g. no fiber or no mirror arm). High speeds of up to 300mm/sec Laser power of up to 4kW Beam source can be selected based on application (e.g. CO2 Laser for plastic cutting; Fiber Laser for metal cutting)
R&D Staff / Researcher at Jenoptik Automotive North America
Universidade de Santiago de CompostelaUniversidade de Santiago de CompostelaUniversidade de Santiago de CompostelaTechnology Transfer Office
Universidade de Santiago de Compostela posted this:
High Quality Thin-films (down to 4nm) by Water-based Chemical SolutionCheaper alternative, versatile, with the quality required for fundamental studies and applications. - Very high quality of epitaxial (bi)layers, down to 4 nm, comparable to PLD. - Outstanding homogeneity (over 1" substrate) and very affordable alternative to high-vacuum tech. Some examples: - Yttrium Iron Garnet (YIG) over GGG; ZnO over sapphire. - Ferroelectric BiFeO3 on LSMO. Manganites, cobaltites and their combinations - Combined with MBE, e.g. Multilevel device integrated on silicon: Small, 2017, 1701614, cover (http://doi.org/10.1002/smll.201770208).
Universitat Politècnica de Catalunya - UPCUniversitat Politècnica de Catalunya - UPCUniversitat Politècnica de Catalunya - UPC posted this:
High resolution non-contact measurement of biophysical parametersA prototype of a novel laser-based displacement sensor enabling subnanometric resolution measurements of biophysical parameters has been developed. The system is in addition extremely compact (few cm3), robust and non-contact. Partners to further develop the current prototype, to pursue novel applications, and/or to establish commercial agreements along with technical cooperation are sought.
CSIC - Consejo Superior de Investigaciones CientíficasCSIC - Consejo Superior de Investigaciones CientíficasCSIC - Consejo Superior de Investigaciones Científicas posted this:
High resolution paterning in organic semiconductorsCSIC has developed a new a method for high resolution structural and/or compositional modification in a molecular organic semiconductor film. This method has applications in the production of electronic, optoelectronic and photonic devices, among others. Industrial partners are being sought to collaborate through a patent license agreement. An offer for Patent Licensing
Alfonso del Rey PérezICMAB-CSICAlfonso del Rey Pérez posted this:
High resolution patterning in organic semiconductorsIcmab researchers have developed a new method for high resolution structural and/or compositional modification in a molecular organic semiconductor film. This method has applications in the production electronic, optoelectronic and photonic devices, among others.
Technology Transfer Officer at ICMAB-CSIC
Georgetown UniversityGeorgetown UniversityGeorgetown University posted this:
High sensitivity detection system for measuring Terahertz frequenciesThis invention presents a method of detecting terahertz frequencies using a substrate with improved temperature dependence, high electrical performance and exhibits high variation of resistance with temperature which is crucial for thermal detection applications. The strong temperature dependence increases responsiveness enabling superior performance in thermal detection systems compared to conventional technologies.
University of WaterlooUniversity of WaterlooUniversity of Waterloo posted this:
High throughput protein isolation & purification systemBackground The global protein purification and isolation market size was valued at USD 7.8 billion in 2021 and is expected to grow at a compound annual growth rate (CAGR) of 10.5% from 2022 to 2020, reaching USD 19.16 billion by 2030. Drug discovery relies on the structural information of a protein to predict its potential efficacy. Common technologies used during this process include mass spectroscopy, amino acid sequencing, x-ray crystallography, nuclear magnetic resonance, and surface plasmon resonance. Most of these methods require highly purified protein samples, and often in large quantities ranging from ug to mg. However, current purification technologies involving chromatography or gel/capillary electrophoresis are batch modes rather than continuous, and this limits the throughput. Furthermore, they may require harsh solvents or detergents that will damage the protein or alter its structural properties.
- University of WaterlooUniversity of Waterloo
University of Waterloo posted this:
High UV efficiency lightingResearchers at the University of Waterloo have created a low-cost hybrid nanomaterial, “NanoLite”, which illuminates pure white light and can be processed into light emitting structures and devices from liquid (i.e. solution) or solid (i.e. powder) forms. This NanoLite material makes full use of the UV light (absorbs broadly in the UV spectral range) and converts it into visible light. This allows for very energy efficient fluorescent lighting to be made using NanoLite. Additionally it is possible to create fluorescent lights that do not require the use of mercury. Because of its versatility and chemical compatibility, this material can be used in various configurations and devices and can also be tuned to produce any colour of light.
RAMOT at Tel Aviv University Ltd.RAMOT at Tel Aviv University Ltd.RAMOT at Tel Aviv University Ltd. posted this:
High Voltage Photovoltaic Cells with High EfficiencyA novel photovoltaic cell is described for converting sunlight to electricity at higher efficiency relative to existing cells, and with improved flexibility for integration in modules, both one-sun and concentrating. The new cell contains many small sub-cells, which are internally connected in series. Such configurations are called Monolithic Integrated Modules (MIM) and they are capable of providing very high open circuit voltage. Our MIM design is based on a monolithic device with vertical PN junctions with significant expected advantages in performance relative to existing MIM designs: higher voltage; smaller contact area and no front metallization grid, leading to higher efficiency; better utilization of the solar spectrum; and better matching to integration in modules including concentrator modules. High-voltage cells can be electrically connected in parallel instead of series, leading to nearly independent operation (voltage-coupled instead of current-coupled) even under non-uniform illumination and even partial shading conditions. This will improve the overall performance of a photovoltaic system, and permit a less demanding and less expensive optical design. Project ID : 6-2011-180FUNDITEC posted this:
High-added value products from Agro-Food residuesTechnology for development of valuable products for the food and packaging industry that applies to hygienic design of facilities and food safety and Circular Economy (Life cicle, Eco design, Reuse of food by-products including water) Looking for Research co-operation and Commercial agreement with technical assistancePatrick Van De Vyver posted this:
High-definition respiratory monitoring tool - Bainisha's Twin Chest SystemCurrent technology Current systems for measuring/monitoring respiratory movements (such as Thorax displacement) @ medical level, rely on one single technology: Inertial Measurement Units (IMU) aka "accelerometry". The resulting data of such measurements however are very often inadequate & hard or impossible to interpret. Problem E.g. the raw IMU-data output of coughing may look exactly the same as the raw IMU-data of riding a bike on really bumpy road ! When such type of confusion arises, it is impossible to distinguish between very different events. Solution A second sensor technology is added: a very thin, ultra-stretchable, very accurate displacement sensor. This sensor is fixed to the body as a simple self-adhesive patch. The fixation is of such a high quality and "integrates" with the skin so thoroughly, that it is nick-named a "Second Skin"-sensor. Together with the on-board IMU the "Second Skin" sensor forms a Sensor Fusion System. I.e. by cross-linking the raw data of two very different sensor concepts all uncertainties, "grey"-zones and impossible to interpret situations are eliminated. The sensor-fusion concept also widens and multiplies the capabilities for capturing a multitude of different types of "body language/events"
CEO Bainisha at Bainisha
Meghan Meyer posted this:
High-Frequency Nasal Cannula (HIFINC)- Innovative High-Frequency Nasal Cannula (HIFI-NC) used for spontaneously breathing infants to avoid intubation or - postextubation respiratory support. - Portable, lunch box-sized, battery-operated, positive end-expiratory pressure (PEEP), and adjustable device. - Generates adjustable frequency vibrations to transmit to the nearest point of a nasal cannula, aiding infants in faster recovery from respiratory distress.
Other at Georgetown University
Airable Research Lab, business line of Ohio Soybean CouncilAirable Research Lab, business line of Ohio Soybean CouncilAirable Research Lab, business line of Ohio Soybean CouncilSmall and Medium Enterprise
Airable Research Lab, business line of Ohio Soybean Council posted this:
High-melting soy-based waxesAirable Research Lab has synthesized a range of polyurethane-based, higher-melting waxes with a variety of distinctive properties. These bio-derived waxes provide an alternative to high-performing carnauba, paraffin, and montanic waxes. Airable’s singular wax is made from widely available resources, allowing for effective and stable supply chains.
- University of WaterlooUniversity of Waterloo
University of Waterloo posted this:
High-performance air suspension systemSuspension systems are used to reduce vibrations/shocks transmitted to the vehicle body from the road/terrain being travelled in order to enhance driver/passenger comfort and protect cargo and chassis. Typical designs are a compromise between performance measures such as vehicle ride, handling, load capacity, size constraints and energy consumption. The University of Waterloo is actively seeking automotive suppliers and manufacturers interested in commercializing an innovative, highly tunable air suspension system.
- Universitat Politècnica de Catalunya - UPCUniversitat Politècnica de Catalunya - UPC
Universitat Politècnica de Catalunya - UPC posted this:
High-performance CMOS-MEMS manufacturing technologyA new technology for low-cost and high-performance MEMS sensor design using a standard CMOS process has been patented. This allows for virtually any microprocessor and integrated circuit to become aware of its physical operating environment thanks to the multiple sensory information that it provides at minimum additional cost. Partners to further develop the system and/or to establish commercial agreements along with technical cooperation are sought.
Yeda posted this:
High-Performance Electrochromic DevicesHigh-performance electrochromic materials that exhibit a practical combination of low-voltage operation and efficient color-switching, as well as long-term stability have been developed by the group of Prof. van der Boom. Electrochromic materials that are currently available in the market offer a broad range of colors and a fair electrochromic activity. For the incorporation of such materials into a wide range of real-world applications, there is a need for more intense coloration, shorter switching times and improved stability.
BSUIR R&D Department posted this:
High-precision radio altimeters of low heights in the millimeter wavelength range for use in vehiclesUniversity has developed a range of radio altimeters of low heights in the millimeter wavelength range. Delivery of the finished product. Product development for specific customer requirements.UNIVERSIDAD DE BURGOS posted this:
High-strength self-compacting siderurgic concreteSelf-compacting concrete with electric arc furnace slag in all fractions that is composed of Portland cement as primary binder, ground granualted blast furnace slag as secondary binder and ladle furnace slag as ternary binder, in addition to aggregate, water and admixtures, metallic and/or synthetic fibers. Due to its innovative composition and installation procedure, it achieves excellent results of durability, sustainability and aesthetics.BSUIR R&D Department posted this:
High-temperature cavitometer (up to 1000° C.)Designed for recording changes and monitoring the activity of cavitation in liquids and metal melts at temperatures up to 1000° C. Cavitation meter is equipped with a USB output and a memory card and comes with a data processing software.
Sayali WaradUniversity of Alberta, Technology Transfer ServicesSayali Warad posted this:
High-temperature multivariable microwave sensors for Oil-Sand applicationsSensor for multivariable analysis of oil sands at high-temperature and high-pressure environmental conditions. The sensor is fabricated and tested in the microwave and millimeter-wave research lab.
IP Market Analyst at University of Alberta, Technology Transfer Services
- Universidade de Santiago de CompostelaUniversidade de Santiago de CompostelaUniversidade de Santiago de Compostela
Technology Transfer Office
Universidade de Santiago de Compostela posted this:
HIGH-THROUGHPUT CALORIMETRY. Thermal Microsensor with Improved Temporal and Spatial ResolutionThe prototype developed within ERC-PoC "ANTS" project, has demonstrated its sensitivity for a new concept of microcalorimeters, as well as providing advantages in microfluidics. We aim to: a) Integrate this technology within microfluidic devices or applications where size and fast response time are crucial. b) Develop a High-Throughput Calorimetry going beyond the current capabilities on ITC. > Sensing element. Ferromagnetic permalloy line 4x28 µm x 20 nm thick: affordable, miniaturization… Sensor was fabricated in a single deposition. > Temporal response. Milliseconds, to stimulus >10 microwatts; further improvements are in progress. > Easy adoption. Compatible with standard configuration of microcalorimeters. > IPR: EP, US, CN, KR, JP 
Covid-19 Innovation Challenges by InnogetCovid-19 Innovation Challenges by InnogetCovid-19 Innovation Challenges by Innoget posted this:
High-Throughput Sequencing Methods to Test SamplesHighly parallel test for the presence of SARS-CoV-2 The currently used test for SARS-CoV2 virus uses molecular methods for detecting the presence of viral RNA sequences in subject samples. This is the approved gold standard in the field. The current application of this test requires several cumbersome steps that are labor intensive and require non-trivial reagents (which are becoming a global bottleneck). It is clear that during the next stage of managing the COVID19 pandemic, large scale testing will be needed. Project ID : 47-2020-10893
University of Alberta, Technology Transfer ServicesUniversity of Alberta, Technology Transfer ServicesUniversity of Alberta, Technology Transfer Services posted this:
High-Yield, Highly Reactive Polyols for Polyurethane ProductionNew method to create higher polyols yields that eliminates toxic solvent use, reduces operational costs, and process integration. Enables improved physical properties (e.g., increased functionality, higher reactivity, low viscosity)
Yeda posted this:
Higher Efficiency of CRISPR Gene Editing Using Chimeric Cas9CRISPR-Cas9 is a powerful tool for genome editing, widely used for basic research and the development of treatments for genetic diseases. However, its efficiency is currently limited. The current technology is a new chimeric Cas9 fused to a domain that recruits DNA repair factors directly to the genomic site that is being edited, thus doubling the efficiency of ‘error-free’ genome editing. This novel and highly efficient chimeric version of the Cas9 endonuclease is thus particularly relevant for clinical gene therapy applications.
