Technology Offers Site map description
M
UACOOPERA University of AveirouacooperaUACOOPERA University of Aveiro posted this:
MAGNETIC NANOPARTICLES FOR TEMPERATURE-CONTROLED MOLECULE AND CELL SEPARATION AND DETECTIONCoated and functionalized magnetic nanoparticles for e.g. detection and separation of DNA and RNA, protein purification, cell separation and immunoassays, con-trolled by temperature. Contrary to state-of-art mag-netic nanoparticles presently used for separation, which always present a certain degree of aggregation, the present technology proposes nanoparticles with tem-perature-controlled magnetic response. The magnetic response of these new nanoparticles is suppressed at higher temperatures (tunable between 40°C and 100°C) avoiding aggregation and is enhanced at lower temperatures promoting separation.
Technology Transfer Office at uacoopera
Javier Martínez GonzálezUniversidad de Alcalá-OTRIJavier Martínez González posted this:
Magnetic nanoparticles stabilized with carbosilane dendritic systems and their usesThe research group BIONANODEN «Dendritic Nanosystems for Biomedical Applications» oftheUniversityofAlcalápresents the procedure for obtaining and using of magnetic nanoparticles stabilized with cationic carbosilane dendritic systems. These nanoparticles interact with microorganism and nucleic acids for their removal or extraction.The group seeks to reach licensing agreements, collaboration agreements or commercial agreements with technical assistance, with enterprises from the food industry, cosmetic, biotechnology, Biomedicine or pharmaceutical sector.
Commercialization Specialist at Universidad de Alcalá-OTRI
Yeda posted this:
Magnetic resonance imaging (MRI) Of Tissue Fibrosis Without Contrast AgentCardiac fibrosis is a scarring event in the cardiac muscle that causes abnormalities in cardiac function and significantly increases the risk of sudden cardiac death. Although a large proportion of the western population is at high risk, early detection is usually not applicable by the currently available imaging methods. Prof. Michal Neeman and her team developed a new magnetic resonance imaging (MRI) method to detect tissue fibrosis with increased sensitivity and without administering a contrast agent.
Richard Gray posted this:
Magnetic Silica Particles for DNA & RNA IsolationThe MagIso™ DNA & RNA Magnetic Silica Particles have been developed for rapid and reliable isolation of nucleic acid from plant tissues, whole blood, serum, plasma, buccal swabs, saliva, bacteria, plasmids, forensic samples and other body fluids.
Marketing Manager at CD Bioparticles
Dirección de Transferencia Tecnológica (DIT) Universidad Adolfo IbáñezUniversidad Adolfo IbáñezDirección de Transferencia Tecnológica (DIT) Universidad Adolfo IbáñezAgente de Innovación at Universidad Adolfo Ibáñez
View ProfileDirección de Transferencia Tecnológica (DIT) Universidad Adolfo Ibáñez posted this:
Magnetics Nanotubes for Electromagnetic Interference BlockingCurrently, the increasing density and intensity of radiofrequency radiation cause strong Electromagnetic Interference (EMI), negatively affecting the performance and lifespan of various sensitive electronic devices. Our technology produces high-density nanotubes that shield devices from EMI without significantly increasing their weight or volume.
Agente de Innovación at Universidad Adolfo Ibáñez
Deniz BayramogluDarmstadt University of TechnologyDeniz BayramogluHead of IP- and Innovation Management at Darmstadt University of Technology
View ProfileDeniz Bayramoglu posted this:
Malodorogenic Sensor for Carbon Monoxide DetectionWe are searching for interested companies in discussing application areas and the benefit of this technology. Also a technology license/purchase of the invention and related patents would be possible. Commercial usages are manifold and in regard to a search report by the patent office the patent application was deemed very inventive. The newly developed sensor consists of a specifically coated paper. In presence of CO the functional component of the stable coating reacts chemically under rapid release of a non-toxic, malodorous substance. For more information please take a look at the Technology Exposee (in English or German language).
Head of IP- and Innovation Management at Darmstadt University of Technology
Mark RichardsonNational Biofilms Innovation CentreMark RichardsonCEO at National Biofilms Innovation Centre
Mark Richardson posted this:
Managing, detecting or engineering in-vivo biofilms and the penetration of active speciesOur Partners, the University of Nottingham, University of Warwick and National Physical Laboratory (NPL), are seeking companies with an interest in managing, detecting or engineering in-vivo biofilms. Particularly those who would benefit from characterizing them at a molecular level or tracking the progress of a target molecule using models of the lung and skin infection.
CEO at National Biofilms Innovation Centre
Jagiellonian UniversityJagiellonian UniversityJagiellonian University posted this:
Manganese-lactoferrin complex stimulating the growth of probiotic bacteriaThe subject of the offer is manganese-lactoferrin complex with properties stimulating the growth of probiotic bacteria in digestive system. Possible applications of the invention include prevention and treatment of bacterial infections (including sepsis in newborns), chronic inflammatory bowel diseases, dietary supplementation in prevention of bacterial infections and some other indications.
Georgetown UniversityGeorgetown UniversityGeorgetown University posted this:
Manganese-Nitride based Novel Magnetic Materials- Development of a novel ionically driven synthesis method to grow high-quality ordered manganese- nitride based magnetic materials - This manganese-nitride based films can be potentially integrated into existing spintronic devices such as MRAM, magnetic storage, and magnetic sensors - Exhibits perpendicular magnetic anisotropy and substantial domain wall velocity
University of Huelva posted this:
Manual Handler of Concrete SleepersThe machine was designed to disengage steel bars from prefabricated concrete sleepers manually, which allows to increase production, safety at work and to improve the technical properties of the final product. The stretcher has two benches that allow movement in two directions, longitudinal and trasnverse. The process is done in such a way that the four active screws are de-stressed at the same time, avoiding damages.
SUSANA CÁMARA DECIMAVILLA posted this:
Manufacture of an eco-cobble from recycled materialA research group from the University of Burgos has developed a procedure for the manufacture of a lightweight cement eco-cobble with industrial polymer waste. This technology allows waste from car roofs to be disposed of, building a material with very good properties and with application in the construction and civil engineering sector.
CEO at UNIVERSIDAD DE BURGOS
uacoopera posted this:
Manufacturing method of metal foams and porous metals metal matrix nanocomposites with nanometric dispersoids uniformly distributed and their uses (vehicle applications, houses, machinery, equipment and devices with superior performance)A group of researchers from a Portuguese university developed an innovative method for manufacturing a new generation of closed-cell metal foams reinforced with nanodispersoids combining the powder technology method with colloidal processing. The invention respects to a product with excellent energy absorption capacity to impact and sound damping for vehicle applications, houses, machinery, equipment and devices with superior performance.UNIVERSIDAD DE BURGOS posted this:
Manufacturing process optimization method for metallic components in the industry.The vast majority of metal products in the industrial level are obtained from sheet metal forming, which are used in a diversity of applications, from car bodies, appliances and planes, together with beverage packaging. In order to define the final design and structure of a stamped component there are two fundamental steps: the manufacturing process to perform the part and the structural simulation to overcome the requirements for performance specifications. The University of Burgos has patented procedure for the design and manufacturing of cold stamped metal part components that establishes an interconnection between the process simulation and the structural simulation during the development of the stamped components, so the mechanical properties of the material are modified in function of the predefined level got in each zone of the component.
University of WaterlooUniversity of WaterlooUniversity of Waterloo posted this:
Mapping & localization without LIDAR: A robust camera SLAM solutionBackground Visual odometry is the ability to localize with only a camera while moving. Simultaneous Localization and Mapping (SLAM) extends this to also mapping the world simultaneously. The result is a mapping and localization method that produces LIDAR like results with only an inexpensive camera. Direct methods use pixel values while indirect methods use detected visual features. Hybrid methods leverage the advantages of Direct and Indirect Video Odometry. However, hybrid methods in general require complicated systems with a relatively high computational requirements limiting their real-time performance. These methods also cannot perform well in texture-deprived environments, may not provide a consistent performance, and may require a separate process to build and maintain several different map representations.
Tech Transfer CIIMARCIIMAR - Interdisciplinary Centre of Marine and Environmental ResearchTech Transfer CIIMARBusiness Development Manager at CIIMAR - Interdisciplinary Centre of Marine and Environmental Research
View ProfileTech Transfer CIIMAR posted this:
Marine compounds with antimicrobial ActivityThe invention describes the synthesis and the use of synthetic pyrazino [1,2-b]quinazoline-3,6-diones derivatives, a new class of compounds with antibacterial and/or antimalarial activities.
Business Development Manager at CIIMAR - Interdisciplinary Centre of Marine and Environmental Research
UNIVERSIDAD DE BURGOS posted this:
Market research, consumer studies and advice for the development of online and mobile commerceStrategy planning and design to analyse a market, define the target, market segmentation and develop a new electronic or mobile business as exclusive or complementary to an offline business.
Universidad de Burgos posted this:
Market research, consumer studies and advice for the development of online and mobile commerceThe use of new technologies (Internet/mobile phones) can involve a competitive advantage for small and medium sized firms. The advice can be focused on the development of a new business or on the complementarion of a new business at a low cost with an existing one. Introducción en el campo de las nuevas tecnologias como ventaja competitiva para empresas de cualquier tamaño. el asesoramiento puede ser tanto para empresas nuevas que desean entrar en un mercado con bajo coste como de complemento para empresas ya posicionadas en el mercado offline.Jorian Bos posted this:
MATCHX - End-to-end deep coverage network-solutionMatchX develops superior LPWAN (Low-Power-Wide-Area-Network) hardware and software, a comprehensive IoT cloud and reporting solutions with blockchain. MatchX provides deep coverage reaching underground basements and inside refrigerators up to 20km+, ultra-low power (runs for 10+ years), a large connection number (connects over 60k sensors and devices with one MatchBox), and low cost.
Other at EIT Digital
Air Products posted this:
Material and Process to increase Oxygen Concentrator PurityCrystalline zeolites in oxygen concentrators have differential selectivity with respect to the gaseous components of air, making it possible to remove nitrogen, argon and other trace elements from the feed air to the PSA process. Current oxygen concentrator technologies utilize NaX, CaX or LiX zeolites to selectively remove nitrogen from feed air in the PSA process. With such adsorbents, oxygen product purity is limited to nominally 95% because argon is not removed and concentrates in the product gas. The Air Products’ pressure swing adsorption process and silver-exchanged lithium-x zeolite combine to enable the selective, initial adsorption of nitrogen over oxygen and argon and subsequently, the selective adsorption of argon over oxygen.UNIVERSIDAD DE BURGOS posted this:
Material capable of detecting the decomposition of certain packaged foods.Researchers at the University of Burgos have developed polymers that are capable of detecting the compounds released by certain decomposing foods. Using this technology is possible to know quickly and safely if packaged food, specifically fish, is still suitable for consumption. These materials can be presented in the form of films, porous membranes and integrated into other fabrics, such as cotton fibres.
UNIVERSIDAD DE BURGOSUNIVERSIDAD DE BURGOSUNIVERSIDAD DE BURGOS posted this:
Material capable of determining copper in must samplesResearchers from the University of Burgos have developed a polymer that is capable of interacting with copper. In this context, it has been verified that, using this material, the concentration of copper in must samples can be determined quickly and easily.
UNIVERSIDAD DE BURGOS posted this:
Material capable of determining copper in must samplesResearchers from the University of Burgos have developed a polymer that is capable of interacting with copper. In this context, it has been verified that, using this material, the concentration of copper in must samples can be determined quickly and easily.
TEC Eurolab posted this:
Material CharacterizationWe assist manufacturing companies, from automotive to aerospace, from energy to biomedical, from food to cultural heritage, in gaining and verifying the maximum performance of products and processes, with safety and quality. Our numerous accreditations, including 17025, 9100 and Nadcap, are a further guarantee of this. The centre consists of a: - metallurgy department - chemical department - mechanical testing laboratory - in-house workshop, capable of supporting the various departments in the production of test pieces and equipment necessary for carrying out the tests.
Buck Service GmbH posted this:
Material for covering adhesive surface and allows to detach the adhesive material without any residuesWe offer a solution to protect adhesive layers during packaging and/or storage. Neither the adhesive layer nor the packaging material will be damaged when the product is unpacked.
Kyoto University posted this:
Materials based on iron-catalyzed synthesisThe production of semiconductors, OLED displays, all-solid-state batteries, agrochemicals, pharmaceuticals, and fuel cells assumes the use of rare metals such as palladium as catalysts. However, rare metals are toxic and expensive due to limited supply. Iron, on the other hand, is an abundant inexpensive metal with low toxicity which makes it suitable for multiple applications including the manufacturing of electronics and medical products.
Unismart - University of Padua FoundationUnismart - University of Padua FoundationUnismart - University of Padua Foundation posted this:
Matrices for in vitro tumor tissues allow to test antineoplastic drugs and protocolsDisclosed is a 3D matrices for in vitro growth of tumor tissues. Recreating a good model of tumor tissue in vitro allows you to experiment with new formulation anti-neoplastic drugs, to develop the optimal conditions of electroporation as well as the study of the cellular mechanisms underlying the disease.
Taras MaiulaOtava Research InstituteTaras Maiula posted this:
Matrix metalloproteinase-2 Targeted LibraryThe Matrix metalloproteinase-2 (MMP2, gelatinase A, 72 kDa type IV collagenase) is involved in different functions such as reconstruction of the vasculature, angiogenesis, tissue repair, inflammation, tumor invasion and atherosclerotic plaque rupture. Mutations in the MMP2 gene are associated with Torg-Winchester syndrome, arthritis syndrome, multicentric osteolysis and other pathologies. Therefore, small molecule compounds targeting metalloproteinase-2 may be potential treatment for a variety of diseases related to abnormality functioning of MMP2.
Head of the QC department at Otava Research Institute
- Dirección de Transferencia Tecnológica (DIT) Universidad Adolfo IbáñezUniversidad Adolfo IbáñezDirección de Transferencia Tecnológica (DIT) Universidad Adolfo Ibáñez
Agente de Innovación at Universidad Adolfo Ibáñez
View ProfileDirección de Transferencia Tecnológica (DIT) Universidad Adolfo Ibáñez posted this:
MBHT. Territorial Human Well-Being MatrixThe Territorial Human Well-Being Matrix (THWM) facilitates demonstrating the positive impact of real estate projects by evaluating territorial well-being through 18 indicators grouped into four dimensions: accessibility, environmental, socioeconomic, and security. It provides a detailed analysis, ranging from the local to the regional level, and simplifies the demonstration of positive impact using an index that ranges from 0 to 1.
Agente de Innovación at Universidad Adolfo Ibáñez
University of Huelva posted this:
Measurement system for the identification and accurate determination of distorting loads in electrical networks and microgridsThe only measurement of distortion level in a network can highlight the need for action to control it. Among those actions is, for example, the use of power filters. However, the determination of the most suitable point where the filter must be connected and its most appropriate configuration requires further analysis of the micro-network (a subset of nodes in the network with different loads connected to each). Therefore, an additional study becomes necessary to establish the responsibility of each load in global distortion levels. In addition, the establishment of the model of the most responsible loads is also necessary in order to decide the filter configuration. In this sense, the load may be voltage distorting or current distorting. All this information is provided by the device of the invention. Indeed, the device, besides distributing the responsibility for overall levels of distortion between each agent, reports whether loads are voltage harmonics or current harmonic sources. This information is the most relevant to determining the power filter settings that best mitigate the distortion in each network node.
Meghan Meyer posted this:
Measuring Exact Telomere Length- A novel method of obtaining patient telomere length data through the collection, processing, and analysis of genomic DNA derived from a biological sample - Method for the diagnosis of telomere-related conditions and diseases in patients, with the ability to monitor various aspects of patient health and aging - Compared to current solutions, this method is efficient, accurate, precise, relatively inexpensive, and well suited for high-throughput use and large population studies
Other at Georgetown University
