Technology Transfer OfficeView Profile
Center for Technology Transfer and Commercialization of Novosibirsk State University posted this:Novel technology of geological mapping with reduced exploration costsNovosibirsk State University (Russia) has developed a new paradigm of geological mapping of Pacific-type folded belts. It allows to improve the quality of geological mapping and to reduce the cost of geological exploration of natural resources. Exploration costs are cut down by excluding/reducing the scope of surface and subsurface exploration in unpromising areas. The university seeks for partners to sign commercial agreements, R&D agreements, and service contracts.
Graft Polymer UK Ltd posted this:Project: Innovative pilot production modified compounds by PE125 standard for multifunctional applications.Producing PE125 using GRAFTALEN™ MP-UHHD. Consumer properties, which should be taken into consideration: 1) The unique toughness of the material (the highest rate of all known polymers), namely, Over 160 kJ/m2 2) High abrasion resistance 3) Low friction coefficient (self-lubricating) 4) High resistance to chemically aggressive reagents (media) 5) High creep resistance (geometric stability) Ordinary way - This type of process is quite expensive. Production of PE125, in compounding with bimodal PE100, from 8 to 45% of supermolecular polyethylene is injected, reaching dispersion by multiple compounding (4 stages) in an extruder cascade (XXXXX technology). GRAFTALEN™ MP-UHHD (alloy) is a MELT-PROCESSABLE concentrate of UHMWPE on an HDPE matrix. As HDPE, you can choose the most affordable HDPE (pipe) grade. To obtain polyethylene according to the standards PE125 (with a minimum strength indicator MRS> 13.8-14 MPa, in comparison PE100 has MRS only 10 MPa), a significant improvement in the resistance against hydrostatic pressure is required. For a conventional bimodal HDPE, this indicator is difficult to achieve, since it directly correlates with the impact strength/density indicators and with simple extrapolation, it turns out that the required indicator for PE125 simply does not reach the bimodal HDPE matrix. Another problem - the difficulty in maintaining the geometric stability of the pipe (the thickness at the top of the pipe is often less than at the bottom) due to the sagging effect (the phenomenon of the gravitational flow of a polymer melt). This phenomenon is more pronounced for thick-walled pipes. The specific blend of HDPE with UHMWPE allows solving these problems above.
University of Huelva posted this:New procedure for the purification of water contaminated by metals and the respective systemsThe invention solves the problems of inefficiency which usually shows the conventional passive treatment systems. The reactive fills developed for the removal of inorganic contaminants historically have focused on removing low concentrations of these (typical features of coal mining), however when these fillers are faced to high concentrations of metals (sulfur mining, uranium, industrial water waste…) quickly clogging and loss of reactivity occurs. The present invention allows the removal of metals without clogging and/or loss of reactivity. This is achieved by the use of a coarse inert material with high surface mixed with a fine-grained reactive material, so that the surface of the inert material is breaded with reactive material. Coarse fragments of inert material act as a frame, providing large pores that reduces clogging by precipitates. The small particle size of the reactive material provides a large surface area that increases its reactivity.
University of Huelva posted this:Procedure for obtaining a renewable resource of metals from acid minewater, and the respective systemsIs known in the state of the art the recovery of metals from the acid aqueous solution that contain them, generally by liquid-liquid extractions. For metals recovery at industrial scale is necessary that these metals can be recovered simultaneously by means of a single extraction step. There are several extraction reagent for this purpose, all these reagent are very expensive and the industrial process for the metal recovery (particularly for rare earth and yttrium) are very complex and finally expensive. The present procedure allows to recovery selectively metals (particularly rare earths and yttrium) by the neutralization of acid mine waters. The objective is to revalue the metal content dissolved in this waters.
Universidad de Alicante posted this:Laboratory device to measure gas diffusion coefficients at real conditions.The Applied Petrology Group of the University of Alicante has developed an automatic device and a method to determine gas diffusion coefficients of single gases from a gas mixture under atmospheric conditions. The device works in a wide range of relative humidity and temperature and can be employed to test any permeable or porous material. The procedure allows to calculate the gas diffusion coefficients for samples with different size and nature (soils, rocks, concretes, synthetic materials, etc.). It is a non-destructive test that can be used to calculate the gas diffusion coefficients of more than one gas at the same time. It is looking for companies that are interested in this technology for its commercial exploitation.