Universitat Politècnica de Catalunya - UPC posted this:Efficient BIST architecture to detect defects in TSVsA new BIST (Built-in Self-Test) architecture has been developed to detect defects in TSVs (Through Silicon Vias) during the pre-bond phase. A simple circuit is included to detect defective TSVs affected by hard and/or weak defects, adding low area overhead and applying a simple and fast test methodology. The same circuit can be subsequently re-used for reconfiguration if a defective TSV has been detected. Partners to further develop the technology and/or to establish commercial agreements along with technical cooperation are sought.
Universitat Politècnica de Catalunya - UPC posted this:New device for bidirectional optical linkA method and apparatus for bidirectional optical link using a single optical carrier and colorless demodulation and detection of optical frequency shift keyed data have been developed and patented. Partners to further develop the system and/or to establish commercial agreements along with technical cooperation are sought.
Universitat Politècnica de Catalunya - UPC posted this:Flexible device to increase bandwidth in bidirectional optical linkA new method for increasing the bandwidth in bidirectional optical links and passive optical networks has been developed and patented. This method uses a flexible simple, integrated and wavelength-agnostic semiconductor device to achieve re-modulation of the incident seed light with simultaneous phase and intensity modulation. Partners to further develop the system and/or to establish commercial agreements along with technical cooperation are sought.
Technology Transfer OfficeView Profile
Yissum - Research Development Company of the Hebrew University posted this:High Speed, High Spatial Resolution Scanning Micro-ellipsometerMetrology instrument for measuring coatings properties/dimensions Keywords: measurement, device, Project ID : 14-2017-4398
Daniel M. Vasconcelos posted this:
Intellectual Property Manager at INESC TEC
Technology Transfer OfficeView Profile
Center for Technology Transfer and Commercialization of Novosibirsk State University posted this:Energy efficient technology of perfect crystal growthA university laboratory (Russia) has developed a versatile method of perfect crystal growth as a technology to produce a wide range of crystals. These can be applied in detectors, customs terminals for cargo and cars examination, anti-terror systems, in a tomography of ultrahigh permission and a magneto-optics. The laboratory is looking for industrial partners to identify crystals for mass-market applications, for transfer of technology of crystal growth and sale of crystal growth equipment.
Technology Transfer Office
CITCEA-UPC posted this:Technology transfer in renewable energies, power electronics, energy control, electrical vehicles...CITCEA-UPC is a technology transfer center which was created in 2001 within the UPC (Universitat PolitÃ¨cnica de Catalunya, BarcelonaTech), and it is specialized in responding to electrical and electronic technological challenges. The aim of the center is to receive these challenges and solve them by creating a functional prototype that will serve the companies to eventually develop a new commercial product or to solve a new technological problem created by the growth and evolution of the society.
DIT Hothouse posted this:UPQC: A Device for Power Quality EnhancementUPQC (Universal Power Quality Conditioner) allows optimal control of a power electronics-based conditioner. Comprising both shunt and series elements (inverters), UPQC compensates for sags and swells, unbalance and distortion (harmonics)in the supply current and supply voltage respectively. UPQC delivers cost savings, increased reliability and enhanced electrical power network functionality. It also employs modular control software and novel techniques for load side short circuit protection of series inverters.
DIT Hothouse posted this:Strata Vision: Automated Scanning and Fault Detection for PPEDIT Hothouse is seeking a suitable commercial partner to take this technology to market. The establishment of a start-up software business or a licensing agreement with a clean room services company are two possible routes to market. Industry partners will have the added benefit of a highly experienced DIT project team to help deliver the final product. StrataVision has featured strongly in national (Enterprise Ireland) and international (Hong Kong PU) enterprise awards.
Universitat de València posted this:HyLED optospintronics devicesThe most innovative aspect of this innovation is that provides new optospintronic devices with low emission threshold voltages. Also, the new devices have the following advantages: Efficiency: light emission threshold voltages from 2 V. Stability: use of air-stable electrodes, with high work function. Spin valve properties (magnetoresistance): control of electrical properties by means of magnetic fields, for example light intensity and colour. Low cost: manufacture with commercial and readily available materials, using soluble deposition methods, much cheaper, and viable on a large scale, that evaporative deposition methods.
Universitat de València posted this:Light-Emitting Electrochemical Cells based on ionic dyesThe use of ionic dyes leads to materials that do not suffer from compatibility issues and allows for a much more economic production of LECs. These dyes are known for many years and used in applications such as photographic films and recordable DVD discs, and are produced in large quantities at low cost. Some examples of suitable ionic organic dyes are cyanine, hemicyanine and squarilene dyes.
Centre Technology Transfer CITTRU posted this:A novel route of the CMK-3 carbon replica synthesis, which may be a material useful in various catalytic and sorption processes as well as electrochemical applicationsThe major advantages of the proposed synthesis route are following: •minimizing of the number of synthesis steps, •elimination of toxic reagents and solvents, •simplification of the equipment required for the synthesis as well as reduction of time and energy consumption, •high reproducibility of obtained product, •a higher structural arrangement of the resultant replica in comparison to materials obtained by the methods previously reported in the literature, •higher content of surface oxygen-containing groups responsible for the high catalytic activity and sorption capacity.
Air Products posted this:Ion Implant Gas Delivery SystemsExamples of sub-atmospheric gas delivery technology suitable to deliver such species might be adsorption of the ion implantation gas onto solid or use of a solid precursor source for the source gas.This offering incorporates both the onsite electrochemical production of arsine and the utilization of ionic liquids as complexing agent for the delivery of phosphine and 11BF3 molecules.