Climate Change mitigation Technology Offers

Radoslaw Rudz posted this:
Licensing Manager at Centre Technology Transfer CITTRU

A new, effective method for obtaining common ash cuttings The subjest of this offer is a technology for obtaining common ash seedlings by indirect adventitious organogenesis. This method omits the stage of forming and development of the somatic embryo, and thus significantly reduces the number of passages and expensive components of culture media. Plant regeneration occurs directly from callus tissue, which results not only in lower costs of seedling production but also, what is very important, improved genetic stability compared with micro-propagation by the method of somatic embryogenesis. Besides, the developed method allows obtaining calluses with selected genotypes, e.g. resistant to negative abiotic or biotic factors (including pathogenic fungi). The obtained seedlings have genotypes identical to the callus genotype and therefore are also resistant to harmful biotic and abiotic environmental conditions.

Centre Technology Transfer CITTRU posted this:

The universal network of sensors adapted to measure the concentration of particulate matter in the atmospheric air The subject of the offer is measuring the concentration of particulate matter in the ambient air in a real time. The sensors are regularly calibrated, which makes the results much more reliable. Applications: environmental protection, smart buildings and cities

The universal network of sensors adapted to measure the concentration of particulate matter in the atmospheric air

Universitat Politècnica de Catalunya - UPC posted this:

NEW SOLUTION TO PREVENT EXCESSIVE WEAR IN GEAR USEFUL FOR WIND TURBINES A new system to prevent the excessive wear in a tooth gear has been developed and patented. The system is specially developed to prevent the wear at the pitch and/or yaw gear tooth systems from the wind turbines but it could be used in others gears applications. Partners to further develop the system and/ or to establish commercial agreements along with technical cooperation are sought.

NEW SOLUTION TO PREVENT EXCESSIVE WEAR IN GEAR USEFUL FOR WIND TURBINES

Universitat Politècnica de Catalunya - UPC posted this:

Environmental Quality Assessment of contaminated soils Environmental quality of soils is determined using analytical chemistry methods, with expensive and sophisticated equipment. Toxicity assays provide a global response regarding the danger of contaminated soil to living organisms. However bioassays are based in lengthy experimental procedures (between 7 and 28 days) to provide reliable results. Normalized soil assays use different species of earthworms and collembola that must be grown and maintained in specialized facilities. Partners to further develop the technology and/or to establish commercial agreements along with technical cooperation are sought.

Environmental Quality Assessment of contaminated soils

Consejo Superior de Investigaciones Científicas posted this:

Enzymatic production of 2,5-furandicarboxylic acid from 5-methoxymethylfurfura a a l l CSIC, University of Zaragoza and Technische Universität Dresden have developed an enzymatic composition and its use as an enzymatic cascade for the production of 2,5-furandicarboxylic acid (FDCA) from 5-methoxymethylfurfural (MMF). This cascade is self-sustained with the only consumption of atmospheric oxygen and the MMF itself. The method can be applied to the conversion of MMF into FDCA step in the bioplastic producing industry, switching from the current inorganic catalysts employed to the use of enzymes for the FDCA production. Industrial partners are being sought to develop and commercialize the enzymatic composition through a patent licence agreement. An offer for Patent Licensing

Enzymatic production of 2,5-furandicarboxylic acid from 5-methoxymethylfurfura

FUNDITEC posted this:

Use of proteins from alternative sources for food applications At FUNDITEC we have a wide experience in the valorization of biomass from microalgae (both lipid and protein extracts) to be used in the development of products of interest in the food industry. Looking for Research co-operation, Technical co-operation and Partner Search

Laser Consult Ltd. posted this:

Innovative Technology to Utilize and Recycle Sewage Sludge Our partner, a Hungarian company, developed a patented technology that provides a solution for transforming municipal sewage sludge into solid fuel (Solid Recovered Fuel -SRF), which also enables sewage plants to achieve significant cost savings. The company is looking for potential licensing partners in the field of sewage plant construction and operation.

Innovative Technology to Utilize and Recycle Sewage Sludge

Alexander Kvashnin posted this:
Director at Center for Technology Transfer and Commercialization of Novosibirsk State University

The pulverized coal preparation technology for efficient and environment-friendly combustion A university in Russia has developed and patented technology for preparation of pulverized coal fuel for clean combustion. The main advantage of the technology is its adaptability to various coals, methods of coal preparation, boilers. The technology provides deeper combustion of pulverized coal fuel with simultaneous reduction of emissions, dust formation, explosion hazard and slagging of boilers. The university is looking for partners for technology transfer, technical cooperation, services.

Miguel Menendez posted this:
Professor / PhD. at Universidad de Zaragoza

Catalytic membranes for efficient combustion Flow-through catalytic membranes offer lower combustion temperature than conventional packed bed catalytic reactors. This technology could be employed to clean air from VOCs or to achieve efficient combustion of fuels.

Yissum - Research Development Company of the Hebrew University posted this:

Clay-Polymer Sorbents for the Removal of Organic Pollutants from Water Clay-Polymer Sorbents for the Removal of Organic Pollutants from Water Project ID : 8-2012-2876

Clay-Polymer Sorbents for the Removal of Organic Pollutants from Water

Ilythia Morley posted this:
Intern - Commercialization Team at Korea Institute of Energy Research

Evacuated tubular solar collector with eccentric type manifold flange A team of researchers at the Korea Institute of Energy Research (KIER), have developed an advanced solar collector technology using an evacuated tubular solar collector and eccentric type manifold flange.

Korea Institute of Energy Research posted this:

Method of manufacturing high-density CIS thin film for solar cell Researchers at the Korea Institute of Energy Research (KIER) have developed a method of manufacturing high-density CIS thin film for solar cells.

Sección de Innovación:Valorización y Emprendimiento posted this:
Innovation Consultant at Universitat de València

One-step water recycling for inorganic and organic pollutants Researchers from Universitat de València in collaboration with Università della Calabria have developed a new patented technology related to water recycling and Metal-Organic Frameworks. The patent application consists of new materials that eliminate inorganic and organic pollutants in a single step. In this way, these materials avoid the multi-step sequential protocols that are currently applied in water recycling plants. The materials of this invention are based on Multivariate Metal-Organic Frameworks (MTV-MOFs). They have a wide range of applications in water recycling plants such as pharmaceutical, textile, food, plastic, mining... etc, as well as for agricultural and domestic use.

One-step water recycling for inorganic and organic pollutants

Laser Consult Ltd. posted this:

“Air filter integrated in a bicycle’s wheel” – giving bicycles the power to provide cleaner urban air This product offers a simple, end user inclusive, and inexpensive way of filtering the air from particulate matter particles (PM 10, PM 2.5 and similar). This product is integrated in a bicycle wheel. The basic concept of the product is using the rotation of the wheel, combined with the axial motion of the bicycle to push air through the filter material, thus filtering the air. The device itself is actually quite simple, and it has a goal of helping towards the solving the problem of air pollution in urban areas. Everyone who has a bicycle is a potential user of the product, but the users that would benefit the most are people living in urban areas that face the problem of air pollution. The best possible way to implement this device is to integrate the filters on bicycles sharing or renting systems that have a significant number of users, for example such systems are common in East Asia. Another way to implement the product is offering it to people as a product that can be added to their bicycle while buying a new one, or fixing their old bicycle. With all of the statements above, the ideal partnership would be with a company, but it is not exclusive to other companies, that works in the mentioned fields. The partnership could be via licensing the product, or selling the rights together with the complete documentation.

“Air filter integrated in a bicycle’s wheel” – giving bicycles the power to provide cleaner urban air

Yissum - Research Development Company of the Hebrew University posted this:

MercuRemoval Ltd.MercuRemoval Ltd. Project ID : 26-2015-3141

MercuRemoval Ltd.