Universidad de Alicante posted this:Novel 3D-polymeric monolithic catalystResearchers from Inorganic Chemistry Department at the University of Alicante have developed a new procedure to obtain heterogeneous monolithic catalysts with polymeric support that allow to accelerate catalytic reactions in an optimal way at moderate temperatures, being especially suitable in Preferential Oxidation of Carbon in Hydrogen Rich Gases (CO-PROX). These novel catalysts have been manufactured by 3D printing with complex geometries, improving the performance of current supports. These heterogeneous catalysts are characterized because they have similar conversion and selectivity profiles to current unsupported powder catalysts. They have increased catalytic activity during prolonged reaction times and greater resistance to friction wear. We are looking for companies interested in acquiring this technology for commercial exploitation.
Zakir Hossain, PhD posted this:
R&D Staff / Researcher at University of Bath
Institut Català d'Investigació Química (ICIQ) posted this:Photoinitiators for visible-light induced living polymerizationA new class of photoinitiators of living polymerization induced by visible light has been developed and is made available for testing (under MTA) and/or licensing. The developed initiators trigger the curing of resins by irradiation with low-intensity visible light, while providing polymers with good control of chain length. In addition, through decomposition of the initator, the cured material presents a different colour than the uncured resin.
UACOOPERA University of Aveiro posted this:
Technology Transfer Office at uacoopera
Germán Cabañero posted this:
HEAD OF STRATEGIC PARTNERSHIP at CIDETEC
Institut Català d'Investigació Química (ICIQ) posted this:Adipic acid(s) prepared by catalytic carboxylation of 1,3-butadieneAdipic acid is mainly used industrially in the production of nylon 6,6. The offered technology consists in a nickel catalyzed process of carboxylation of butadiene. The developed process allows preparing adipic acid from carbon dioxide and 1,3-butadiene through a cost effective and competitive process. Industrial partners are sought for process optimization and/or industrialization.
Institute of Chemical Research of Catalonia posted this:Adipic acid(s) prepared by catalytic carboxylation of 1,3-butadieneAdipic acid is mainly used industrially in the production of nylon 6,6. The offered technology consists in a nickel catalyzed process of carboxylation of butadiene. The developed process allows preparing adipic acid from carbon dioxide and 1,3-butadiene through a cost effective and competitive process. Industrial partners are sought for process optimization and/or industrialization.
Technology Transfer Office
Cracow University of Technology posted this:Novel transparent polymer nanocomposites based on PMMA and inorganic semiconductor nanoparticles for optoelectronics applicationsA method of preparing novel and transparent polymer nanocomposites based on a polymeric matrix of polymethyl methacrylate (PMMA) and the inorganic nanoparticles of zinc sulfide doped with manganese atoms (ZnS:Mn).
Institute of Chemical Research of Catalonia posted this:Valorization of HFC-23: trifluoromethylation reactions- clean production of trifluromethylcopper reagent - process works at room temperature and atmospheric pressure - inexpensive and abundant trifluoromethyl source - environmentally friendly process - low-cost reagents - valorization of fluoroform: a by-product of PTFE production - Versatile reagent allowing for a broad scope of reactivity
Institute of Chemical Research of Catalonia posted this:New method to produce trifluoromethyl copper reagents useful in trifluoromethylation reactions from fluoroformThe trifluoromethyl copper derivative useful in trifluoromethylation reactions is prepared at room temperature from readily available and cheap reagents and in high yield, i.e. without the formation of side-products associated to the fast decomposition of the trifluoromethyl anion, that usually forms in processes involving the deprotonation of fluoroform. This is the first method to date for deprotonation-free, direct cupration of fluoroform, a longly sought after reaction.
Universidad de Alcalá-OTRI posted this:New organo-metallic catalysts for the manufacture of polymersA research group from the Inorganic Chemistry Department of Alcalá University has developed a technology that presents a range of catalysts based on coordination complexes and organometallic, active in functionalization processes (expoditation, hydrosilylation) and polymerization of different organic substrates (olefins and cyclic esters). They are metal complexes belonging to the first transition groups (groups 4-6) and elements from the main groups (groups 1,2 and 13). Its application is aimed at the synthesis of materials with new properties (silicon polymers, biodegradable plastics, polyesters) and the production of small molecules with high added value, used as starting products in many industrial processes (epoxides, silanes). The group is looking for manufacturing agreements and joint venture agreements with companies from the agrofood industry, construction and petrochemicals.
Technology Transfer Office
RAMOT at Tel Aviv University Ltd. posted this:Iron oxide nanoparticles (IOP) for the treatment of acute myocardial infarction (AMI) and other inflammatory conditionsA novel approach for the treatment of AMI has been developed using IOPs. IOPs, when injected into the infarcted myocardium, lead to improved heart function after MI. IOPs activate anti-inflammatory macrophages and thus promote tissue healing and repair and prevent myocardial remodeling and dysfunction. Potential Applications IOPs can be used to treat AMI and other inflammatory conditions associated with pro-inflammatory activated macrophages and to promote tissue healing and repair. Advantages ? IOPs are nontoxic ? IOPs are FDA approved for use in humans for MRI imaging Stage In vivo studies in mouse and rat models of MI and heart failure Project ID : 10-2011-247
Ivan Rodriguez Rosello posted this:
Licensing Manager at Universidad de Alicante