Arkadiusz Rudawski, PhD posted this:
Technology Broker at Center for Technology Transfer, Cracow University of Technology
DRUIDS Process Technology S.L. posted this:Simulations and numeric calculations for industry (High level)In INNOVATIONLAB By Druids, we are experts in solving problems of all kinds with the help of simulations and numeric calculations. Our mission is to provide technological solutions to sectors where we can provide high added value. We have the knowledge to solve complicated multiphysics problems of a wide variety of sectors and typology of challenges: • Electromagnetics • CFD (Computational fluid dynamics): water, air ... • Induction heating • Structural & Mechanical assemblies • Thermal
Miguel Menendez posted this:
Professor / PhD. at Universidad de Zaragoza
Avazyme posted this:Food safety, quality, authenticity and consulting servicesAvazyme offers agile and custom problem solving services to the food industry through the application of biological and chemical analytics. Differentiated from larger CROs that offer a rigid standardized menu of services, Avazyme is focused first on agile problem solving. Avazyme has state-of-the-art instrumentation and methodologies. Problem solving is applied to food safety, quality, authenticity and GMO testing. Avazyme also offers consulting in food regulatory science, Maximum Residue Levels (MRLs), import tolerances and food safety, quality and secondary standards, nutritional labeling, authenticity and GMO analysis. Consulting in new assay development, validation and certificate of analysis is also offered. Differentiated from larger CROs, Avazyme offers nimble, rapid and custom analytical method development and validation. Offers include development of laboratory and point of use assays. Avazyme offers organizations Independent Lab Validation (ILV). Avazyme is BSL2, EPA GLP, FDA GLP compliant and will work with companies requiring GMP and ISO17025 standards.
Universidad de Alicante posted this:Natural hybrids nanopigments synthesis for multiple industrial applications.The Colour and Vision Research Group of the University of Alicante has been designed a new process to develop nano-structured hybrid nanopigments (from synthetic or natural dyes). These nanopigments confer improved optical, thermal, and mechanical properties when they were applied on composite materials. The nanoclays, dyes, and additives have been selected depending on the composite matrix source. Also, it has been selected the additives order in the process of synthesis, based on the material properties that would be going to improve. The parameters that could be control with this new system are: the adsorbed dye concentration, the degradation temperature of the reinforced dye, the degradation temperature of the final nanocomposite, the bending resistant modulus, and the UV-VIS colour fastness. Also, it can be controlled the optical properties as transparency and colouring power degree. It is looking for companies interested in commercial exploitation of these new colored nanomaterials.
Universidad de Alicante posted this:Laboratory device to measure gas diffusion coefficients at real conditions.The Applied Petrology Group of the University of Alicante has developed an automatic device and a method to determine gas diffusion coefficients of single gases from a gas mixture under atmospheric conditions. The device works in a wide range of relative humidity and temperature and can be employed to test any permeable or porous material. The procedure allows to calculate the gas diffusion coefficients for samples with different size and nature (soils, rocks, concretes, synthetic materials, etc.). It is a non-destructive test that can be used to calculate the gas diffusion coefficients of more than one gas at the same time. It is looking for companies that are interested in this technology for its commercial exploitation.
Cracow University of Technology posted this:Laboratory for Trace Organic Analyses - Cracow Univerisity of TechnologyLaboratory for Trace Organic Analyses is an integral part of the Department of Chemical Engineering and Technology at Krakow University of Technology. The Laboratory is accredited from Polish Centre for Accreditation that signed EA Multilateral Agreement. PCA has become a signatory of EA MLA
Universidad de Alcalá-OTRI posted this:Ultrasonic localization and positioning system for extensive indoor spaces.GEINTRA is a research group from the Department of Electronics of the University of Alcala. The group has developed an ultrasonic system, with a friendly configuration, calibration and deployment, which can be intended to cover extensive indoor spaces. The system works in a GPS-like mode. It uses active beacons and is privacy-oriented, without any node limits being located at the same time. The algorithms used allow to deal with noise problems, multipath propagation and near-far effectswhat gives the system a centimeter precision. The group is looking for companies working in automation, computer or telecommunication sectors to achieve technical collaboration agreements.
Universidad de Alcalá-OTRI posted this:Automated control and supervision system for pharmaceutical manufacturing environments.GEINTRA is a research group from the Department of Electronics of the University of Alcala. The group has developed a system which gives the opportunity to control and supervise the environments conditions for pharmaceutical products manufacture. GEINTRA is looking for companies working in Agrofood and Pharmaceutical sectors to achieve commercial agreements with technical assistance.
Universitat de València posted this:Test Kit for anionic surfactant in waterThe most remarkable advantages provided by this technology are: o Simplicity and versatility of the kit, which allows carrying out a high throughput screening or in situ analysis with very short analysis times. o Low analysis cost, since dyes, organic solvents that generate residues and instrumental equipment are not used. o High sensitivity of the method, that detect anionic surfactant concentration lower than the maximum residue limit established in most of the environmental legislation.
Universitat de València posted this:Micromechanical dry exfoliation deviceThe main advantages provided by the invention are: Versatility: the method is applicable to any layered material and on any type of substrate. Simplicity: the method consists in a dry exfoliation without adhesive materials. Quality and reproducibility: the exfoliation is clean (no trace of adhesive), reproducible and it does not produce defects in the substrate. Efficiency: it is possible to deposit a high density of atomically thin layers of the material. Control: it is possible to control the pressure exerted, allowing for a fine-tuning of the deposition conditions depending on the nature of the layered material manipulated.
Universitat de València posted this:Passive sensor for in situ detection of amines in atmospheres Simplicity and ease of use: it is a passive colorimetric sensor that does not require any kind of pretreatment or power supply or external instrument. Low cost: simple fabrication process without high costs Low detection limits: suitable for use in real atmospheres, of the order of 3 mg/m3. Quantitative detection: direct quantitative detection can be carried out by diffuse reflectance of the sensors. Stability: against a wide range of temperatures and to humidity and solar radiation. Reversion resistance.
Universitat de València posted this:Sample collection devices of atmospheric pollutants with high performanceThe main advantages provided by the invention are: Simplicity and reproducibility in the synthesis of the new compound, due to one step synthesis process with simultaneous addition of all reagents. It isn’t necessary the removal of CDs, and it hasn’t intermediate compounds between silica and CDs. It allows the access to VOCs without any post-treatment. Adaptability of the compound to the requirements of each sample collection devices, adjusting the grain size by milling and using appropriate sieves. Procedure cleaner, safer and more economic, since it reduces the generation of toxic waste and the risk of contamination of workers. Reduce analysis time since desorption of pollutants retained in the sample collection devices can be thermal. Retention of pollutants is more independent of environmental conditions than commercial devices.
Universitat de València posted this:New method for the production of metallic oxides with spinel structureThis procedure is faster, with lower energy consumption and generates purer spinels than known methods for spinel production. With this invention, it’s possible to provide new methods for obtaining spinels or other mixed oxides with a higher processability and versatility than those existing to date, allowing also for obtaining new spinels and removing the need for extremely costly phases in time or energy, including milling or heating at temperatures up to 1200ºC.