Organization from Germany posted this Technology CallSeeking thickening agent/s for surfactant-based systems that can be added at the end of production to increase viscosity1. The solution should be applicable to a cold process 2. Ideally a pre-dispersion or liquid would be preferred 3. The thickening agent should not cause turbidity 4. The solution/s should be compatible with anionic and cationic surfactants. 5. Please exclude bio-polymers as a solution.
Clariant posted this Technology CallSeeking Innovative Sustainable Biopolymers and Biorenewable Building BlocksSynthetic polymers are often used as thickening agents for liquid formulations. Already small quantities (< 1%) enable the formation of a gel network, which is most important for the correct application of the product. However, due to their persistence the reputation of synthetic polymers has deteriorated during the last years, which has increased the demand for natural alternatives. Despite the huge interest of the industry in green alternatives, successful candidates are a rarity, due to numerous technical and commercial hurdles. It is therefore most important to find partnerships with universities, start-ups, or well-established companies, which may lead to the development of new sustainable polymers for industrial and consumer applications.
German-Canadian Centre for Innovation and Research (GCCIR) posted this Technology CallSeeking European partners with expertise in biology, drug discovery and cosmeticsAs a participant of the upcoming symposium “2nd GCCIR Matchmaking Symposium” organized by Innoget and GCCIR next November 25th, 2019 in Barcelona (Spain), the company Hermay Labs Corp. is seeking European partners to meet at the Barcelona event to develop a joint collaboration project. Hermay Labs Corp. is specifically interested in European partners with expertise in biology, drug discovery and cosmetics. Further details are described below. In case you are interested in meeting Hermay Labs Corp. in Barcelona to discuss a potential collaboration, please register for free to the symposium clicking the “Register to the symposium” button above.
German-Canadian Centre for Innovation and Research (GCCIR) posted this Technology CallSeeking European partners with expertise in drug discovery technologies and a focus on precision medicineAs a participant of the upcoming symposium “2nd GCCIR Matchmaking Symposium” organized by Innoget and GCCIR next November 25th, 2019 in Barcelona (Spain), the company 48Hour Discovery Inc. is seeking European partners to meet at the Barcelona event to develop a joint collaboration project. 48Hour Discovery Inc. is specifically interested in European partners with expertise in drug discovery technologies and a focus on precision medicine. Further details are described below. In case you are interested in meeting 48Hour Discovery Inc. in Barcelona to discuss a potential collaboration, please register for free to the symposium clicking the “Register to the symposium” button above.
Organization from Germany posted this Technology CallSeeking lipids from renewable feedstocksWe are seeking oils from a renewable feedstock to improve the renewable carbon content based on the current raw material portfolio. Six oils (and the mixture at equal ratios) are of particular interest whose physical properties infers significant attributes to the final application.
Organization from Germany posted this Technology CallSeeking multifunctional ingredient with antimicrobial properties for personal care applicationsPreservatives added to personal care product to control microbial spoilage, extend product shelf life and prevent infection in humans. Microbiological control is critical in the beauty industry because microbial spoilage will cause product degradation, leading to potential human health hazard. In recent years, due to growing human health concerns with traditional preservatives like paraben and Isothiazolinones (MIT/CMIT), consumers are drawn toward “’preservative-free’ or ‘self-preserving’ personal care formulations. Here, the company is seeking multifunctional personal care ingredients which apart from delivering its primary property also exhibits a certain level of antimicrobial activity. The ideal ingredients can be emollients, surfactants, rheology modifiers, solubilizer or bio-active. compounds/extracts that can also control microbial spoilage for skin and haircare applications.
Organization from Germany posted this Technology CallSeeking eco-friendly bleaching and oxidative cleaving process for waxesWaxes are typically make up of linear or branched-chain hydrocarbon chains and can contain polar functionalities like e.g. ester or amide groups. Their importance has been well recognized, especially with the growing demand of modern consumer products like packaging, cosmetics and pharmaceutical. Plant-based or renewable waxes are also gaining favor in recent years due to higher sustainability compared to fossil based waxes. We are seeking sustainable green oxidative cleavage process that can convert renewable ester waxes, like rice bran wax and sugar cane wax, to similar end products obtained by conventional processes. Many oxidative cleavage processes are already established in the industry, but not many are eco-friendly. Furthermore, with the shifting focus from fossil waxes to plant-based waxes, alternative oxidative technologies do result in chemically different products from different plants. Here the company is keen to explore modern bleaching technologies or to work with technology-partners with bleaching experiences on renewable materials. The company is open to partners from any country and to a variety of cooperation. Research cooperation agreements with research organizations might yield into publications or consequent R&D contracts. Depending on the stage of technology readiness, an out-licensing of the process is possible or a joint venture might be a way to further develop for feasibility studies for a pilot scale up.
METALSA posted this Technology CallSeeking Additive Manufacturing Materials for Cold Forming DiesFind materials that are able to be processed by means of additive manufacturing technologies and are suitable for cold forming operations. The materials provided should withstands heavy cyclic loads due to the working conditions of the process. We are seeking innovative materials that are capable of being processed thru additive manufacturing technologies and could work under cold forming process conditions.