UNIVERSIDAD DE ALICANTE

New bioreactor for growing plant cell culture in suspension

Posted by IVAN from UNIVERSIDAD DE ALICANTEResponsive · Patents for licensing · Spain

Summary of the technology

The Plant Proteomics and Functional Genomics research group at the University of Alicante has designed and manufactured a bubble column-type bioreactor to carry out the culture of cell a cell suspension of any type of plant in aseptic conditions. Its novel design allows to recover the culture medium, to replace it with another medium, and to reuse the remaining biomass for a next culture operation. This novel bioreactor is characterized by its low cost and because it allows a homogenous and efficient aeration, and the correct agitation of the culture. We look for companies interested in licensing this technology for commercial exploitation.

UNIVERSIDAD DE ALICANTE
UNIVERSIDAD DE ALICANTE
UNIVERSIDAD DE ALICANTE
UNIVERSIDAD DE ALICANTE
UNIVERSIDAD DE ALICANTE
UNIVERSIDAD DE ALICANTE
UNIVERSIDAD DE ALICANTE
UNIVERSIDAD DE ALICANTE

Description of the technology

TECHNICAL DESCRIPTION

The present invention solves the technical problems described above as its novel design allows the optimal plant cell culture, thus overcoming the limitations in both biomass and bioactive compounds production in which the exchange of the culture medium is required.

This invention relates to a novel bioreactor that allows for the growth of a plant cell suspension under aseptic conditions in a liquid medium whose composition fulfills the nutritional and physiological requirements of the cells under appropriate physicochemical conditions.

The bioreactor is composed of the following three parts to be assembled and sterilized (Figure 5):

  1. Body (Figure 1): it is a hollow container of one piece, of circular section, with straight walls and curved bottom. The body comprises a spherical and a double-wall cylindrical part (with inlet and outlet piped holes) through which a thermostated liquid can flow to regulate and maintain constant the culture temperature. Both parts are internally separated through a porous wall (glass or steel) whose mesh size allows the constant and uniform flow of fluids between them, but not of particles larger than the pore size. The upper part of the body is finished with a horizontal flange that allows it to rest on the bracket, and thus the cap rest on the body to get a hermetic seal. The spherical part has, at least, two piped holes to connect fluid inlet / outlet: one connected to a sterile (oil-free) air line with adjustable flow rate, and another for liquid or gas flow, thereby achieving a homogeneous supply of air to the plant cell culture, and an efficient mass transfer. The body can be transparent or opaque, and glass or steel.
  2. Cap (Figure 2): it is a solid cylindrical stainless steel part with several holes to be able to screw it to the support and to attach other accessories (plugs, aseptic sampling tubes, filling tubes, sensors etc.). It is used to close the open top of the body. It has short ports for connecting flexible pipes for the addition of fluids and for the gas inlet / outlet. On its inner side, there is a peripheral groove to be able to couple a rubber or silicone sealing ring that allows the bioreactor to be a hermetic seal.
  3. Bracket (Figure 3): it is a piece of stainless steel with, at least, four tubes in equidistant parallel arrangement, welded at the end of ground support to a tube that forms an incomplete circumference, and on the other side, to a solid ring which has several holes that match with those of the cap so that they can be joined by screws running through both pieces. The ring has welded handles to facilitate the transport of the bioreactor, and three screwed on pieces of flexible material where the body can rest to avoid fracture of the glass because of the strains. The bracket allows the attachment of the body and the cover.

Additionally, the bioreactor can be connected to reservoirs (Figure 4) for liquid exchange. These reservoirs are connected through autoclavable silicone hoses to the inlets and outlets of the bioreactor.

The air flow may enter through the base of the body to aerate the culture, or through the cap to vacate the liquid into an empty reservoir. The air line can also be reconfigured so that the medium contained in a filled reservoir entering through the base can be pushed up by pressure to the bioreactor.

The operation of the bioreactor can be summarized as:

  1. Preparatory sterilization operations are carried out.
  2. The sterilized assembled bioreactor is filled or emptied: the aseptic emptying / filling cycle can be repeated as many times as desired (Figure 6).
  3. The next step is aeration and pneumatic mixing of the filled bioreactor: air flow is conducted through the porous base, resulting in a fine sparging effect in which the air dispersed as tiny bubbles rises freely producing an effective aeration and stirring effect.
  4. The bioreactor is inoculated in an aseptic environment with a plant cell suspension. It derives from callus of dedifferentiated cells from plant tissue cultured in vitro.
  5. Growth of plant cells in "batch" mode from the inoculum of the previous cell suspension. The aeration favours homogeneity and growth of the culture until the stationary phase of growth is reached, or until the desired amount of biomass is obtained.
  6. Recovery of the culture by disassembling the cap and transferring it to another container.


In addition, it is possible to culture plant cells in "fed batch" mode from a pre-culture in situ. After batch cultivation, the nutrient-depleted medium is displaced to an empty reservoir. The biomass remains in the bioreactor, which is then filled with fresh medium rich in nutrients to continue the cell growth as described in point 5 above for the "batch" mode. This operation can be repeated as many times as desired. When the last cycle ends, the culture is recovered as described in point 6 above.

Some examples of plant cell culture are described below using the bioreactor described herein (7-liter prototype):

Example 1: Culture of a Vitis vinifera cell suspension in batch mode è the culture temperature was held constant at 24°C and aeration was adjusted between 0.3 and 0.6 l.l-1.min-1. The culture reached the stationary phase after 28 days, achieving a 7-fold increase of the initial biomass.

Example 2: Extracellular production of the natural compound trans-resveratrol in "batch" and "fed batch" modes by a Vitis vinifera cell suspension at 24°C and aeration at 0.43 l.l-1.min-1. è an extracellular concentration of trans-resveratrol higher than 3 g/L was achieved, being able to re-use the biomass obtained up to 3 production cycles without loss in the yield. The average length of each cycle was 4 days, with an average resveratrol production of 15 g/cycle.

Example 3: Extracellular production of trans-resveratrol in "fed batch" mode coupled to a "batch" culture of a Vitis vinifera cell suspension è an 8-day culture cycle was carried out at 24°C and aeration between 0.47 and 0.54 l.l-1.min-1, followed by 3 production cycles at 24°C and aeration at 0.58 l.l-1.min-1, with an average duration of 5 days/cycle, and with an average resveratrol production of 12 g/cycle.

INNOVATIVE ASPECTS AND ADVANTAGES OF THE TECHNOLOGY

This novel bioreactor has the following advantages over today's commercially available stirred tank or airlift bioreactors of similar size:

  1. It is a low cost bioreactor.
  2. It allows homogenous and efficientpneumatic aeration and agitation, even at high cell densities.
  3. Its design allows for working in a permanent aseptic environment throughout the process.
  4. Its design allows a R3:

    - Recover the culture medium.

    - Replace the culture medium.

    - Re-use the biomass for the next culture operation.
  5. The materials used are re-usable.
  6. The design is adapted to the growing needs of any type of plant cell culture in suspension.
  7. Reduction of operational cost versus single use (disposable) models.
  8. Especially suitable for obtaining products (biomass or metabolites) whose commercial value in the market is low or moderate.
  9. The design is adapted to the needs of plant cells culture in suspension.

CURRENT STATE OF THE TECHNOLOGY

A 7-liter prototype (Figure 7) has been designed and built for the laboratory scale tests that have been carried out. In its construction, re-usable materials (glass and metal) have been used. The following table shows the characteristics of oxygen transfer and mixing time at different aeration volumes.

Oxygen transfer rates and liquid mixing time at different aeration volumes (Table 1).

The Oxygen Radical Absorbance Capacity (ORAC) analysis of trans-resveratrol obtained from Vitis vinifera cell cultures using this prototype has a relative ORAC value of 4.40, while commercial trans-resveratrol of purity > 98% has an ORAC value of 4.68, so the antioxidant power of the product obtained is 94%compared to the pure product.

After carrying out a cost analysis, it has been concluded that the commercial production of trans-resveratrol using Vitis vinifera cell cultures with this 7-liter prototype, is around 500 €/kg.

MARKET APPLICATIONS

The present invention is framed in the field of Biotechnology. In particular, it refers to a bioreactor to carry out, under aseptic conditions, plant cells culture in suspension with the aim of obtaining biomass or metabolites or both with commercial interest for the following sectors:

  • Cosmetic.
  • Pharmaceutical.
  • Cleaning and personal care.
  • Nutraceuticals.
  • Food.
  • Agricultural.


COLLABORATION SOUGHT

We look for companies interested in licensing this invention for commercial exploitation through:

  • License agreement.
  • Technology and knowledge transfer agreements.
  • Provide technological support in those techniques that require high training or sophisticated instruments that are not available to the requesting company.

Intellectual property status

Granted Patent
P201730479
Spain

Technology Owner

UNIVERSIDAD DE ALICANTE

Research & Technology Organization

Related keywords

  • Care, Hygiene, Beauty, Cosmetics
  • Biological Sciences
  • Biology / Biotechnology
  • Agriculture and Marine Resources
  • Agrofood Industry
  • Genetic Engineering / Molecular Biology
  • Stem cells and biobanks
  • Pharmaceuticals/fine chemicals
  • Other industrial equipment and machinery
  • Agriculture, Forestry, Fishing, Animal Husbandry and Related Products

About UNIVERSIDAD DE ALICANTE

Research & Technology Organization from Spain

As one of the largest universities of Spain, Universidad de Alicante has a rich history of innovation. Our main objective is goal is to to transfer the technology that our research teams are developing to the industries and companies which are able to take profit from them. R & D & Innovation results and know-how are offered in the domains of Chemistry, Materials, Environment, IT, Building and other applied subjects.

Send your request

By clicking "Send your request" you are signing up and accepting our Terms of Service and Privacy policy

Technology Offers on Innoget are directly posted and managed by its members as well as evaluation of requests for information. Innoget is the trusted open innovation and science network aimed at directly connect industry needs with professionals online.