Showing 11791 to 11805 of 21941 results

45. Influence of degree of intercalation on the crystal growth kinetics of poly [(butylene succinate)-co-adipate] nanocomposites

The influence of the degree of intercalation of polymer chains in the two dimensional silicate galleries on the crystallization behavior of poly[(butylene succinate)-co-adipate] (PBSA) is being reported on. The nanocomposites were prepared by melt-blending of PBSA and organically modified montmorillonite (OMMT) in a batch-mixer. Two different types of commercially available OMMTs, with different extents of miscibility of organic modifiers with PB...

Research Paper

  • +3 weeks

Nonisothermal crystallization kinetics of poly(ethylene terephthalate) nanocomposites

This article reports the nonisothermal crystallization kinetics of poly(ethylene terephthalate) (PET) nanocomposites. The non-isothermal crystallization behaviors of PET and the nanocomposite samples are studied by differential scanning calorimetry (DSC). Various models, namely the Avrami method, the Ozawa method, and the combined Avrami-Ozawa method, are applied to describe the kinetics of the non-isothermal crystallization. The combined Avrami ...

Research Paper

  • +3 weeks

Effect of Organoclay on the Orientation and Thermal Properties of Liquid-Crystalline Polymers

The preparation and thermal and thermo-mechanical properties of nanocomposites based on liquid-crystalline polymers (LCP) and organically-modified layered silicate (OMLS) is described. From XRD patterns, very little smectic ordering is present in the pure LCP; in the nanocomposites, the polymer chains tended to orient in the direction of the dispersed clay layers. According to the DSC results, during first heating, the first melting peak represe...

Research Paper

  • +3 weeks

Effect of Organoclay on the Morphology andProperties of Poly(propylene)/Poly[(butylenesuccinate)-co-adipate] Blends

The effect of organically modified clay on the morphology and properties of poly(propylene)(PP) and poly[(butylene succinate)-co-adipate] (PBSA) blends is studied. Virgin and organoclaymodified blends were prepared by melt-mixing of PP, PBSA and organoclay in a batch-mixer at1908C. Scanning electron microscopy studies revealed a significant change in morphology ofPP/PBSA blend in the presence of organoclay. The state of dispersion of silicate lay...

Research Paper

  • +3 weeks

Thermal and thermomechanical properties of poly[(butylene succinate)-co-adipate] nanocomposite

In this article the thermal and thermomechanical properties of neat poly[(butylene succinate)-co-adipate] (PBSA) and its nanocomposite are reported. Nanocomposite of PBSA with organically modified synthetic fluorine mica (OSFM) has been prepared by melt-mixing in a batch mixer. The structure of nanocomposite is characterized by X-ray diffraction patterns and transmission electron microscopic (TEM) observations that reveal homogeneous dispersion o...

Research Paper

  • +3 weeks

Thermal and Thermo-mechanical Properties of Poly(ethylene terephthalate) Nanocomposites

In this study poly(ethylene terephthalate) (PET)/clay nanocomposites with two different weight percentages of montmorillonite (MMT) have been prepared by melt-extrusion technique. The X-ray diffraction (XRD) patterns and transmission electron microscopic (TEM) images reveal the formation of intercalated nanocomposites. The melting and crystallization behaviors of neat polymer and nanocomposite samples have been investigated by using both conve...

Research Paper

  • +3 weeks
Advanced CMC - EU edition MasterClass

Advanced CMC - EU edition MasterClass

08 - 10 March, 2023

online

 This training will present Technical and regulatory requirements for developing a medicinal product which are becoming stricter every day, the products themselves become more and more complex. ...

  • +6 months
Dissolution testing - EU edition MasterClass

Dissolution testing - EU edition MasterClass

07 - 08 March, 2023

online

This topic is not only of central importance in the context of generic drug development, but also in particular in the case of changes in the physicochemical properties of the active substance, in the manufacture and/or composition of products, and in the case of site transfers....

  • +6 months
Pharmacopoeial compliance testing - EU edition MasterClass

Pharmacopoeial compliance testing - EU edition MasterClass

10 - 11 May, 2023

Online Event

 In this context, particular attention is paid to the revised, harmonized chapter on chromatography and the new chapter on implementation of pharmacopoeial procedures and you will learn how to apply these important texts in workshops and question and answer sessions....

  • +6 months
Signal and Risk Management in Pharmacovigilance - US edition MasterClass

Signal and Risk Management in Pharmacovigilance - US edition MasterClass

06 - 09 March, 2023

online

The focus of this four days Signal & Risk Management in Pharma online MasterClass training will be providing an update of ongoing activities regarding medicines’ risk and signal management. This Training also provides the practical advice on RMP drafting and preparation....

  • +6 months
Pharma Packaging - US edition MasterClass

Pharma Packaging - US edition MasterClass

06 - 09 March, 2023

online

 This course will deal with Child Resistant packaging, with Smart packaging and will cover tamper evident packaging and the qualification of tamper verification features on healthcare packaging.  ...

  • +6 months
Method Validation and Transfer with focus on the new ICH Q2(R2) - US edition MasterClass

Method Validation and Transfer with focus on the new ICH Q2(R2) - US edition MasterClass

02 - 03 March, 2023

Online Event

Online Masterclass gives practical examples from method validation and method transfer & pitfalls. Also Participants can ask questions interactively....

  • +6 months
International E- Conference On Public Health and Patient Safety

International E- Conference On Public Health and Patient Safety

04 - 05 April, 2023

United Kingdom

International Conference on Public Health and Patient Safety “Public Health 2023” going to be held on April 04-05, 2023. Our conference will bring together a unique and international mix of experts, scientists, researchers, and students to exchange and share their experiences and research outcomes on all elements of Public Health. Public Health 2023 offers an unprecedented program with a great list of famous speakers, wide scope of ex...

  • +6 months
Innov8rs Lisbon | In-person - 2 & 3 May 2023

Innov8rs Lisbon | In-person - 2 & 3 May 2023

02 - 03 May, 2023

Lisbon

Great people.Great content. Join Innov8rs Lisbon for in-depth conversations, relevant connections and quality content. Your 2-day corporate innovation intensive. Learn how to be more effective and have a bigger impact, even when resources are scarce. There's no escaping the prospect of an economic downturn, as most companies brace for strong headwinds. For us as corporate innovators that inevitably means we need to do more with less, ...

  • +6 months