Universidad de Alcalá-OTRI posted this:Blind spot assitance device to exit maneuver in perpendicular and angled parking.Innovative Sensing and Intelligent System is a Spanish research group from the Department of Automatic of the University of Alcala has developed a technology which describes an assistance device for exit maneuvers when the car is parked in perpendicular or angled parking. The invention consists of one or two cameras one settled up on the right lateral back and/or another one on the previous part. The system provides automatically an audible or visual alarm to inform the driver that some vehicles are approaching the exit lane. The group seeks automotive companies to achieve license, commercial or collaborative agreements with technical assistance.
Universidad de Alcalá-OTRI posted this:Portable device to measure the displacement maps on surfaces in the three spatial directionsA Spanish research group from the Department of Signal Theory and Communications of the University of Alcalá along with a Spanish research group from the Department of Mechanical and Mining Engineering of the University of Jaén has developed a portable optoelectronic device to measure the displacement of each surface element in an object when is subjected to deformation. In particular, the device allows obtaining maps of long range displacement (greater than mm) in dynamic regime (in real time). Thus this system is very useful in the experimental study of the materials’ mechanical properties, especially if they suffer large deformations at high speed. It is a computationally simpler alternative and more inexpensive than the digital mapping technique for 3D images which is currently the only one allowing such measures. The group seeks licensing agreements, collaborative and commercial agreements with technical assistance.
Universidad de Alicante posted this:Noble metal-free ceria-based diesel soot combustion catalyst, suitable for gas purification in Diesel engine exhaustsThe developed catalyst does not use Pt, which leads to a cheaper product. The resulting catalyst shows equal or even better performance as Pt catalysts. Following the patented procedure of synthesis, the catalyst produced has a lower particle size. This leads to higher surface per particle and therefore, a better ratio yield when interacting in oxidation reactions, leading to a higher oxygen production rate.
Universidad de Alicante posted this:Low cost sensors for the detection of gaseous hydrogen• New simple preparation method which does not require sophisticated instrumental techniques. • The procedure use low-cost materials and optimizes the loading of the metals employed. • This technology is efficient, producing robust and reliable sensors with high signal-to-response ratio and low cost. • The CNT and nanoparticle suspensions needed are stable and may be stored over long periods of time.
Universidad de Cádiz posted this:New nanostructured catalyzers without noble metals and with low content in lanthanidesSince the 1990's, the mixed oxides of cerium and zirconium have replaced cerium oxide in the composition of the three-way catalyzers used in the automotive industry. The fundamental reason for this is the improved textural behaviour of the oxides of Ce/Zr, compared with the effectiveness of cerium oxide. These mixed oxides are also more effective in the exchange of oxygen with the medium. The Oxygen Storage Capacity (OSC) of the compound is therefore the key property for its application as a component in catalyzers. However, the rare earth metals which are the critical component of these catalyzers have currently increased considerably in price, due to greater demand and limited supply from the few exporting countries. The research group working in this field has been able to obtain nanostructured oxides of Ce/Zr and Ce/Zr/Y with low content in Ce that present very good oxygen storage properties. In addition, costly noble metals are not employed in their formulation, which represents an important economic advantage.
uacoopera posted this:Planar diamond thermistors for harsh environments: applied to temperature measurements in combustion and jet engines for the automobile and aerospace industry, lasers, fuel cells and in biological and aggressive chemical environmentsThe new diamond thermistors can be used for temperature measurements in harsh environments such as aggressive chemicals at high temperature or in biological media due to their inertness. Furthermore, the sintered ceramic substrate guarantees superior adhesion and resistance to fracture under high mechanical loads. The fabricated temperature sensitive diamond surface comprises well adhered ohmic contacts deposited on the backside of the dielectric ceramic substrate. This configuration prevents interaction between the temperature sensitive surface and the surrounding environment which is essential for biochemical devices applications. Furthermore, the planar geometry of the disclosed thermistor maximizes the contact region between the temperature sensitive surface and any solid flat surface on which it is placed. In this way, improved response times are obtained comparing to traditional round shaped thermistors.
Universidad de Alicante posted this:New process for the stereoselective synthesis of acetylenic compounds used as additives in galvanic bathsRegarding the existing state of the technique, the electrochemical processes have characteristics which make them very adequate to be applied for the synthesis of organic compounds with industrial application. Here, oxidation processes occurs upon electrodes named anodes where the substance which must be oxidized loses its electrons on the anode without needing conventional oxidising agents. Therefore, contaminants derived from the use of conventional oxidising agents are not generated and hence, no need for the management of hazardous residues is applicable. On the other hand, the electrochemical processes are developed under soft conditions (atmospheric pressure and room temperature) and clearly facilitate further processes of separation of one of the compounds of the reaction mixture.
Universidad de Alcalá-OTRI posted this:Embedded electronic system for the supervision of vehiclesA similar opened electronic system allows to implement different intelligent services for transport. It is a positioning system of high precision, possibilities of communication for long distance(movable telephony) and short distance (radio frequency). The detection of vehicles speeding depending on maximum authorized speed and the implementation of the idea of " pay as you drive " in order to invoice the vehicle assurance.
Universidad de Alcalá-OTRI posted this:New Active Assisted Driving Systems based on Computer Vision and Laser.- These systems support the conduction as an alert to the conductor in situations of imminent danger or when the conduction is not suitable. - The developed systems show a high capacity of anticipation and a percentage of false alarms practically null. - The group has developed several types of techniques of attendance to the conduction based fundamentally on vision by computer and laser.
Universidad de Alcalá-OTRI posted this:Face tracking and pose estimation with automatic 3D model construction.For the first time, this system of computer vision is able of recognizing the orientation of the human face, with no need of previous identification of the person or offline training. This system is innovative in the way of joining the three algorithms that uses for its functioning: SMAT, RANSAC and POSIT. To the best of our knowledge they had never been used before in that way.
Universidad de Alicante posted this:Energy absorbing device in motor vehicle collisionsResearchers at the University of Alicante have devised a system to partially absorb the energy generated in a crash involving at least one motor vehicle traveling at a high or medium speed. It is a passive protection system for vehicles which absorbs the maximum amount of mechanical energy in a crash with minimal added weight and volume. Assumes additional protection that enhances the vehicle's passive safety, minimizing the consequences of a collision for the passengers. The system has an innovative design that allows placing it in different positions inside the vehicle or making structural parts and is manufactured with advanced materials. Innovative aspects The system is designed to provide protection that goes beyond the current regulations for passenger cars, as it is able to absorb a larger proportion of the mechanical energy generated in a collision. Also improve the passive safety of vehicles (vans, trucks) or special vehicles (ambulances, fire trucks, armored vehicles) in circulation. It also provides substantial improvements for heavy duty vehicles, contrary to what is happening now should be able to absorb themselves much of the energy produced in a collision with a vehicle lighter, thereby minimizing the potential damage that may occur in people who travel light vehicle. The system consists in several stages which act consecutively on impact, absorbing energy in a gradual and proportional to the energy generated in the collision, which is a lower acceleration on passengers, thereby reducing the potential injuries. Less weight, volume and system size compared to traditional structural systems, through the use of advanced materials: tensile filaments that act in case of collision, thermosets broken links which act by absorbing the impact energy generated in the fiber and combined with high strength composite metal / polymer composite micro / nanostructures
Amnon Michael Cohen posted this:
Ranjit Guru posted this:
Chief Technology Officer at Delta Foams Radical Technology Solutions
Technology Transfer Office
Universidade de Santiago de Compostela posted this:Sub-µL measurements of the thermal conductivity and heat capacity of liquidsThermalconductivity (K) and heat capacity (Cp) of a wide variety of liquids obtained from ≈ 0.6 μL samples. - Organic molecular solvents - Ionic liquids - Water–polymer mixtures
Technology Transfer Office
RAMOT at Tel Aviv University Ltd. posted this:RF labfar field ;near field ; antenna pattern ;scattering tests; Automatic and manual measurements in; frequency range of 0.1GHz – 20GHz Near-field scanners; field probes ;Agilent Performance Network Analyzer (PNA) ; Signal generators; high-power sources, lock-in amplifier; chemical etching and engraving machine • Characterization and fabrication of antennae and other RF devices (0.1-20GGz) • RF experiments up to 20GHz • Antennae Characterizations • Devices Characterization • Complex Multiphysics experiments • Nonlinear RF devices • Imaging and Field Scanning • Metamaterials and Complex Systems • Radar Applications • Meta- materials Project ID : 12-2016-994