Fundació URV posted this:Development of Electronic Systems for Smart Energy ManagementWe develop electronic power systems with several power sources and loads, which allows the programming of various energy management strategies, based on algorithms and databases obtained by an integrated instrumentation. Therefore, it offers the coordination and optimization of the different power sources, with the result of a high energy saving and life extension of the systems.
University of Vigo posted this:Suppression of Impulsive Noise for Power Line CommunicationsPower Line Communications (PLC) is an emerging field that enables to carry data on a conductor that is also used simultaneously for AC electric power transmission or electric power distribution to consumers. The widespread use of these technologies is however, compromised by the presence of impulsive noise that arises from interferences generated by devices connected to the power line. Therefore removal of impulsive noise is critical to get a high performance of PLC systems. UVIGO researchers have developed a novel methodology to mitigate impulsive noise by monitoring those carriers of the radiofrequency spectrum that are free of transmission in PLC systems. The identification of the noise signals allows its selective removal keeping the quality of the overall PLC signal.
RAMOT at Tel Aviv University Ltd. posted this:Compressive Sensing in Radar DetectionAn efficient method for radar detection of sparse targets using compressive sensing. Compressive sensing allows transmission of a single radar pulse for velocity determination and Doppler detection of targets Project ID : 7-2011-192
RAMOT at Tel Aviv University Ltd. posted this:Cancellation of Non-linear Interference in Optical Fiber CommunicationCancellation of Non-linear Interference in Optical Fiber Communication Project ID : 7-2013-675
Chicagoland Automation posted this:Dual/Triple Sump pump controller with optional bluetooth or Wifi connectivityDual sumpump controller with redundant level sensing and % level showing. Optional Bluetooth/ Wifi connectivity for mobile app or IOT. One primary and one secondary back up pump, Automatic testing of back up pump when water level rise rate is slow. Pump start/stop will vary within programmed range and depending on water level rise to minimize start / stop cycles. Option for third pump.
Universidad de Alcalá-OTRI posted this:Distributed characterization system and method of variations of the refractive index of an optical fiber.The Photonics Research Group of Alcalá University has developed a method and a system that both allow to take at the same time, distributed measures of deformation and temperature, derived from the laser source, vibrations…, based on a ɸ -OTDR system with limited elements and therefore reducing the cost of the sensor system. The group seeks to reach licensing, cooperation and commercial agreements with telecommunications companies or sensing and distributed characterization of optical fiber enterprises.
Universidad de Alicante posted this:Novel and simple procedure for dispersing graphene derivatives in chemically curable resins.The Laboratory of Adhesion and Adhesives of the University of Alicante and the company Dental Global Training, have developed a new procedure to incorporate efficiently graphene derivatives (nanofibers, nanosheets, nanoparticles) in chemically cured resins by using an in situ polymerization technique. The method is very simple and fast, it provides an excellent dispersion of the graphene derivatives in both the solid components of the resin and in the cured polymer matrix, and is entirely friendly with the environment. The novel method does not require the use of organic solvents nor water, ultrasounds, and high pressure/temperature. The resulting resin composites show excellent mechanical properties, good wear resistance, easy manipulation and increase the insolubility in oral fluids, and therefor they have special interest in applications in odontology, traumatology and non-medical applications too (automobile, construction, civil engineering, aeronautics, space engineering, electronics and optics). It is looking for companies interested in acquiring this technology for its commercial exploitation.
Universidad de Alicante posted this:New process for the manufacture of electrodes from superporous nanostructured carbon materialsSpanish University have developed a process for the manufacture of electrodes from superporous nanostructured carbon materials. The process uses electrospraying technique to deposit a suspension of a carbon material over a collector. This method facilitates processing superporous nanostructured carbon materials due to its high efficiency and less complexities compared to conventional techniques. The electrodes obtained can be used in energy storage or analytical sensors in commercial devices.
Technology Transfer OfficeView Profile
Yissum - Research Development Company of the Hebrew University posted this:Conductive Metallized DNA-Based Constructs for Molecular ElectronicsDNA constructs that with metal nanoparticles that can be used as interconnects for molecular electronics. Keywords: DNA, molecular electronics, interconnects, Project ID : 31-2016-4289
Ranganath Kulkarni posted this:
RAMOT at Tel Aviv University Ltd. posted this:Subharmonic Wireless Locking of THz transmitterSubharmonic Wireless Locking of THz transmitter Project ID : 7-2014-858
Spanish National Research Council posted this:Energy harvesting from ambient vibrations for wireless sensors applicationResearchers from the Spanish National Research Council at the Barcelona Microelectronics Institute (IMB-CNM) have recently developed a mechanical energy harvesting device by using a low-cost microelectronic fabrication process. The device acts as an electrical generator and is driven by environmentally-available mechanical energy such as ambient vibrations. Due to its flexibility and small size, it is of easy integration as power generator permitting the provision of full power autonomy to any wireless sensor node during its lifecycle into a network infrastructure following the philosophy “install and forget”. Industrial partners are being sought to exploit the existing know-how through a patent license agreement.
Technology Transfer Office
CITCEA-UPC posted this:Technology transfer in renewable energies, power electronics, energy control, electrical vehicles...CITCEA-UPC is a technology transfer center which was created in 2001 within the UPC (Universitat PolitÃ¨cnica de Catalunya, BarcelonaTech), and it is specialized in responding to electrical and electronic technological challenges. The aim of the center is to receive these challenges and solve them by creating a functional prototype that will serve the companies to eventually develop a new commercial product or to solve a new technological problem created by the growth and evolution of the society.
Fundació URV posted this:NEW PROCEDURE FOR OBTAINING MONOLAYERS OF FUNCTIONALIZED NANOPARTICLESThis new procedure (not described in the bibliography) allows the manufacture of monolayers of metal nanoparticles linked by molecules of organic compounds. As you can see in Specifications, this procedure consists in two successive processes. One of the main advantages of this technology is the minimization of impurities in the functionalized monolayer compared to commonly used techniques. Besides, the manufacture of Schotty diode with this new procedure has been shown for the first time. In the same line, this procedure allows the use of monolayers of metal nanoparticles for metabolite detection. These are two unique and differents aspects of this technology in relation to other known used techniques.