- Anonymous Organization
- From Germany
- Responsive
- Project Size Range : 250,000 - 1,000,000 €
- Posted by
Desired outcome
The proposal should contain chemically identical alternatives to the specified emollients (see attached document) from a renewable feedstock. The physical properties of these emollients are highly desired for the end-use applications, therefore alternatives should be comparable with regards to physical properties.
Details of the Innovation Need
Measurement conditions:
- Viscosity: measured by a rheometer with a 40 mm cone plate and 2° cone angle
- Density: measured on a DMA 4500 with a flexural resonator and viscosity correction for viscosity<700 mPas
- Surface and interfacial tension: measured with a Krüss K100 tensiometer, ring method, radius: 9.545 mm, wire diameter 0.37 mm, immersion depth 3.00 mm
These are the key physical parameters that is used to short-list possible candidates, however further development tests are required to determine compatibility with the respective formulas and sensory aspects.
Discarted solutions
- Mineral oils
- Hybrids such as iso-propyl esters with the iso-alcohol petrochemical derived
- Oils with a strong odour and colour
- Genetically modified feed
- Oils containing traces of mineraol oil derived compounds such as mineral oil saturated hydrocarbon (MOSH) and mineral oil aromatic hydrocarbon (MOAH)
Attached documents
Related Keywords
About Us
We are a company with global and multinational brands. Our business is highly R&D driven. We sell our products worldwide and target considerable market sizes with our innovations.
About Innovation Needs
Innovation Needs on Innoget are directly posted and managed by its members as well as evaluation of proposals. Innoget is the trusted open innovation and science network aimed at directly connect industry needs with professionals online.