Technology requests browser

1 2 3 4 5 ... 10

D-851anonymous company / Spain 13

Submit your solution>> Share tech request>>
Seeking UV light activated Chemical Compound solvent soluble

UV light; LED technology; glowing; fluorescence; blacklight
- Desired outcome
  
  Solvent based liquid that will glow during the night if lighted with an UV led. Blacklight must come from a small led placed closed to the liquid (not in contact). LED should be powered by DC at 110 - 220V and must be CE conform. Chemical compound should have a low toxicological profile by inhalation.
  
  Company leadering European fast moving consumer goods group focused on home care markets
  
  Share tech request
  
  Details of the Tech Request :
  
  Seeking compound that will glow if lighted by an UV light. Source of light should be a led. Chemical compound must be soluble in paraffinic solvent leaving it completely transparent.
  It should be used as an additive to a current formulation in order to give an additional glowing effect.
  Molecula should be reactive in an area of UV spectrum where LED are available at a low cost Read more
D-849anonymous company / Spain 38

Submit your solution>> Share tech request>>
Seeking a company that delivers the formulation services in the laundry care category for international markets

colour protection, stain removers, antilime scale, Surfactants, Enzymes, Sheets,
- Desired outcome
  
  We would expect the technology supply company to produce a full technical dossier that can be seamlessly feed into a manufacturing environment. The project would consist of a 6th month duration with a launch into the market place within 12 months. The dossier would contain: TDS and MSDS of all the ingredients, manufacturing procedures, final MSDS of the finished product, full Quality plan including key QC tests, Stability test results, performance results, competitor benchmarking, application test results, industrial trials, source packaging, claim support documentation. We may request a 3rd party corroboration of claims. The technology must be a step change with a break through innovation that is acceptable and suitable for international markets.
  
  The company must have a fully equipped laboratory with suitable trained and qualified staff. English is the preferred language for communication . All reports must be in English. French can be used in certain circumstances. A track record in innovation in laundry care would be a distinct advantage. A senior member of staff would be required to handle our account. A fully equipped laboratory is required to test all aspects of the product including physical parameters, performance, spectrophotometers, stability, viscosity etc.
  
  Share tech request
  
  Details of the Tech Request :
  
  We are interested in finding innovative solutions to service the laundry care catergort internationally covering USA, Australia, NZ , EU, Middle East and Scandinavia. We are interested in emerging and new chemicals that can fit this requirment. New surfactants, enzymes , fragrances, new actives and formulations which deliver new / exisiting benefits and features are of importance. As we are an innovative company, we would be most interested in new innovative solutions/formats for the laundry care category particularly powder and liquid gel based system.
  
  The majority of stain removal powder additives are based on Sodium Percarbonate and TAED activator systems. We would be very interested to explore other activator systems especially types that perform at low temperatures 40 degrees and below. We would also be very interested to investigate new surfactant/enzymatic systems that also operate and work at low temperatures particularly 40 degrees and lower. The importance of fragrance stability in these types of formulations is very important. To date the creativity has been limited by the harsh environments created by the chemicals involved. We would be particularly interested in systems that give good stability in paper sachets. The hygroscopic nature of these formulations are very high and lead to reduction in performance and poor aesthetic properties in the form of lumps and solid lumps. Reliance on packaging increases cost so we would be very interested to explore any systems which can overcome this problem.Chemical protection in the form of hydrophobic silicas is a current aid but is not totally 100% reliable.
  
  Liquids are also of interest, particularly those based on hydrogen peroxide. Stability here is of utmost importance of the both the formulation and fragrance. Viscosity of gels is a key physical parameter which we require for optimum application and usage for efficient use by the consumer. Alternative systems based on surfactants and enzymes would be of great interest as would be any other proposals. The peroxide types of formulations are very efficient but cannot be used in triggers safety. Spraying these formulations are dangerous if they come in contact with eyes. Alternative effective formulations which are safe to spray and give similar performance be it in aerosols or triggers would be of interest to the company.
  ]
  Stain removals devices to assist the consumer gives a more complete solution. A physical action and a chemical action works best to remove even stubborn stains. We would be interested see any proposals that combine these two routes.
  The cleaning of whites and stain removal of white garments is an important area for us . Effective OBAs and anti soil redeposition agents are of interest
  Any solutions must comply with international regulations/labelling etc. CLP is the preferred labelling for the EU. All formulations must be non toxic and be suitable for consumer use. Low level allergens is a requirement for any fragrance that may be selected and used. Performance for stain removal must include all the major stain groups oily, protein, bleachable, and perform on all fabrics particularly cotton, polycotton, polyester and nylon.
  Read more
D-818anonymous company / Spain 38

Submit your solution>> Share tech request>>
Seeking a third phase in a water/silicone 2 phase system keeping conditioning and providing shine to hair.

volatile silicone., not greasy, sprayable, combability, Solubility, Shine, conditioner, 3 phases
- Desired outcome
  
  We are looking for a raw material that can be added to a product that contains water and silicones mainly. It should be insoluble/not miscible with water and with silicones, in order to form a third phase.
  Ideally, a raw material supplier has a chemical compound of these properties to offer. If not, we are also open to 1) get a license agreement, 2) acquire the product technology and/or 3) initiate a Joint Development.
  
  Share tech request
  
  Details of the Tech Request :
  
  It should allow to pass from a 2 phase conditioner water/silicones (70/30) to a 3 phase one.
  It should keep the conditioning power.
  It should increase hair's shine.
  It should be able to be used in cosmetics.
  It should be safe for use in contact with human skin. Read more
D-850anonymous company / Spain 68

Submit your solution>> Share tech request>>
Seeking formulation for a trigger spray delivery system to kill or repell Dust mites

natural active ingredien, aerosol, repelling, killing, trigger spray, textiles, acaricide, Dust mite
- Desired outcome
  
  Formulation, for a trigger spray delivery system, to kill or repell Dust mites.
  The formulation needs to be completly developed. The way of action is desired to be as natural as possible. Ideally using natural active ingredeints or mechanical actions to kill the dust mites.
  
  Share tech request
  
  Details of the Tech Request :
  
  Needs to be odourless and able to apply on textiles (not to stain textiles).
  The formulation needs to be marketed in European countries; some information in oredr to register in national legislations will be needed.
  It will be good if the formulation is also complian with BPR.
  Read more

Featured innovation seeker Affinity Petcare

About Affinity Petcare

Areas of interest

Tech requests

Open innovation policy

D-848anonymous company / Spain 58

Submit your solution>> Share tech request>>
Seeking for a technology or raw materials that make fibers, (for instance hair), become fireproof.

thermal protection, non-combustible, firewall, refractory, fireproof, flameproof, Fire resistant
- Desired outcome
  
  We want to protect fibres from fire. Ideally, fibres should resist temperatures of 2000ºC; otherwise should resist 500ºC. We are looking for a Raw Material that can be mixed with other materials during a production process or for a finished product ready to be used as such. Ideally, a Raw Material supplier has a chemical compound of these properties to offer. If not, we will also be open to 1) get a license agreement, 2) acquire the product technology and/or 3) initiate a Joint Development.
  
  Share tech request
  
  Details of the Tech Request :
  
  It should protect from fire or make fibers become fireproof.
  Ideally, fibres should resist temperatures of 2000ºC; otherwise should resist 500ºC.
  It should be safe for use in contact with human skin.
  We are looking for a Raw Material that can be mixed with other materials during a production process or for a finished product ready to be used as such. Ideally, a Raw Material supplier has a chemical compound of these properties to offer. If not, we will also be open to 1) get a license agreement, 2) acquire the product technology and/or 3) initiate a Joint Development. Read more
D-845anonymous company / Spain 49

Submit your solution>> Share tech request>>
Seeking a treatment to remove pilling from wool in a domestic washing machine

protease, wool, Pilling, pills, lint
- Desired outcome
  
  The desired outcome is an ingredient that can be used in a domestic washing machine to remove pilling from wool articles to make the colours appear brighter and make the wool softer to the touch. the outcome could be a finished formula or an ingredient to go into a formula. It could also be a finished product.
  
  Share tech request
  
  Details of the Tech Request :
  
  The solution should consider that wool is a delicate fabric and should not be unduly weakened by the treatment. The treatment should be a single cycle process i.e. it should not be necessary to run a second cycle to remove the active ingredient from the wool or to deactivate it. The treatment will need to be at a low temperature, on a delicate cycle in the washing machine, again so as not to damage the wool. The treatment does not have to be as part of the normal laundering process, it can be a separate cycle in the washing machine. Read more
D-844anonymous company / Spain 57

Submit your solution>> Share tech request>>
Seeking for a technology of raw materials that confer fluorescent and/or phosphorescent effect to hair.

hair, pigments, phosphorescent, fluorescent, Shine
- Desired outcome
  
  We want to make a cosmetic product that allows hair shine bright in the dark due to the addition of fluorescent and/or phosphorescent pigments.
  
  Share tech request
  
  Details of the Tech Request :
  
  It should make hair shine in the dark.
  It should make hair shine when exposed to UV light.
  It should be able to be used in cosmetics.
  It should be safe for use in contact with human skin.
  It should make hair shine in the dark.
  It should make hair shine when exposed to UV light.
  It should be able to be used in cosmetics.
  It should be safe for use in contact with human skin. Read more
D-847anonymous company / Spain 76

Submit your solution>> Share tech request>>
Seeking for a technology or raw materials that make fibers, (for instance hair), become waterproof.

water repellent, Waterproof, hair, fibers, chemical, Chemistry, skin, Textile, cosmetics
- Desired outcome
  
  Fibers usually are damaged and/or modified by water and humidity, we want to protect them of a shape change, by repeling wàter, in order to preserve their properties.
  
  We are looking for a Raw Material that can be mixed with other materials during a production process or for a finished product ready to be used as such. Ideally, a Raw Material supplier has a chemical compound of these properties to offer. If not, we will also be open to 1) get a license agreement, 2) acquire the product technology and/or 3) initiate a Joint Development.
  
  Share tech request
  
  Details of the Tech Request :
  
  It should repel water or make a fiber become waterproof.
  It should be soluble in an aqueous system preferibly, or, otherwise, in an anhidrous system.
  It should be safe for use in contact with human skin. Read more

Featured innovation seeker PANRICO SLU

About PANRICO SLU

Areas of interest

Tech requests

Open innovation policy

D-846hessegim / Israel 69

Submit your solution>> Share tech request>>
Seeking for the following technologies for evaporation smell and personal signature technological capability on the finished product made by ceramic.

Nanotechnology, evaporation, smell, evaporation smell, low evaporation rate, remote signature
- Desired outcome
  
  A technological cooperation for integrate the technologies in finished industrial products made by kind of plastic. A list of the relevant technological solution, the maturity of the technology, present application if there any, and point of contacts to make the next step are needed.
  
  Share tech request
  
  Details of the Tech Request :
  
  Seeking for the following technologies:
  1. Miniature device, millimeteric and/or nanotechnologies, for evaporation smells- The devices will be integrated in the industrial products made by kind of plastic. A kind of initialization capability is needed (electromagnetics, electricity, other). Minimum volume, maximum density and minimum evaporation rate are required.
  2. Designer personal signature technological capability on the finished product made by ceramic is required. Touch, through the air, based on advanced millimetric and/or nanotechnologies materials (integrated on surface or inside the product) are possible.
  Read more
D-843anonymous company / Spain 56

Submit your solution>> Share tech request>>
Seeking for a technology that eliminates ammonia odour in personal care.

ammonia chelating., odour reduction, odour capture, ammonium, ammonia, odour masking, Odour control
- Desired outcome
  
  Ammonia has a strong pungent unpleasant smell. We are looking for a raw material that mask, remove or highly reduces the ammonia odour without affecting its performance in our products.
  Ideally, a raw material supplier has a chemical compound of these properties to offer. If not, we are also open to 1) get a license agreement, 2) acquire the product technology and/or 3) initiate a Joint Development.
  
  Share tech request
  
  Details of the Tech Request :
  
  It should remove or noteaceably reduce ammonia smell in personal care products.
  It should be soluble in an aqueous system preferibly, or, otherwise, in an anhidrous system.
  It should be able to be used in cosmetics.
  It should be safe for use in contact with human skin. Read more
D-841OncoMDx Laboratories / United States 139

Submit your solution>> Share tech request>>
Seeking point-of-care diagnostics for distinguishing between bacterial, viral infections and identification of pathogen from blood or sputum of individuals showing signs of infection such as a high fever.

sputum, Blood, Point-of-Care, PCR, nucleic acid amplification, viral, bacteria
- Desired outcome
  
  Solutions presented should provide an established technology for detecting and/or distinguishing between bacterial or viral infections in individuals showing symptoms of infection such as fever. Ideally the test can be done in a point-of-care setting. Technology requiring central laboratory based testing requiring nucleic acid amplification or other sophisicated methodology is also of interest.
  
  Share tech request
  
  Details of the Tech Request :
  
  Solutions pesented should be economical, easy to implement, not requiring significant capital expenditure on specialized instruments. Technologies not fully validated and requiring development are also of interest. Open to any kind of business arrangement. Read more
D-842anonymous company / United Kingdom 159

Submit your solution>> Share tech request>>
Seeking new catalysts, processes and products to add functionality to speciality polyolefin-based materials (EBA, EVA, HDPE, LDPE and PP) for technically demanding and niche applications

bioplastics, plastics, EVA, EBA, Polyolefins, polyolefin, ethylene vinyl acetate, ethylene butyl acrylate, Polyethylene, polypropylene, LDPE, HDPE, packaging
- Desired outcome
  
  Polyolefins (POs) are versatile plastics with properties such as low weight, transparency, mechanical resistance, flexibility and weather resistance, and as such are used in a wide variety of industries. Whilst many polyolefins are considered commodity materials, specialised grades are used for evolving markets to deliver new functionality, and the client is keen to increase their offerings in this area. They are therefore interested in new catalysts, processes and products to add functionality to the following polyolefins, enabling innovative new grades of these substrate materials:-
  
  • Polyethylene – high and low density (HDPE and LDPE)
  • Polypropylene (PP) copolymers • Ethylene butyl acrylate (EBA)
  • Ethylene vinyl acetate (EVA)
  
  Share tech request
  
  Details of the Tech Request :
  
  Our client is an established European manufacturer of speciality, polyolefin-based materials for use in technically demanding and often niche applications. Polyolefins (POs) are versatile plastics with properties such as low weight, transparency, mechanical resistance, flexibility and weather resistance, and as such are used in a wide variety of industries. Whilst many polyolefins are considered commodity materials, specialised grades are used for evolving markets to deliver new functionality, and the client is keen to increase their offerings in this area. They are therefore interested in new catalysts, processes and products to add functionality to the following polyolefins, enabling innovative new grades of these substrate materials:-
  
  • Polyethylene – high and low density (HDPE and LDPE)
  • Polypropylene (PP) copolymers • Ethylene butyl acrylate (EBA)
  • Ethylene vinyl acetate (EVA)
  
  Emerging market needs include:-
  • Aesthetic performance for automotive and packaging sectors
  • Improved recyclability, biodegradability and sustainability
  • Construction/building performance – replace non-PO materials and improve existing PO performance
  • Energy - Renewable energy – structural materials for wind / marine use
  Energy management/delivery – insulation / conducting for electric car batteries
  • Medical / Healthcare – use of POs in place of nonwovens, composites, etc.
  • Functional packaging to provide multiple properties in one material
  • Innovative agricultural practices
  
  Functional properties to meet the above needs for example:-
  • Combining multiple functionalities (e.g. combining aesthetic and mechanical properties)
  • Improve mechanical properties, prevent degradation & extend lifetime (from use or environmental factors)
  • Biodegradability without additives; separation of mixed PO waste
  • Reduction of impurities (through manufacturing/on-going use) that can affect performance
  • Aesthetic / decoration – scratch resistance, self-healing, transparency, natural surface effects
  • Cleaning / protection – for on-going technical performance and barrier from moisture/gases
  • Biocompatible and skin friendly (e.g. delivery of actives, or internal structural supports)
  • Provide existing properties without harmful/expensive additives – fire retardancy, packaging, etc.
  • Material reduction – increase strength, whilst reducing weight
  
  The client company is well known for its ability to collaborate with customers, responding quickly to market needs to provide solutions that are continually at the forefront of market and regulatory requirements. By continually investing in research and product development, the client ensures they deliver the technical materials required by their customers to drive their business forward in emerging/growing markets. By providing improved functionality for existing grades, their customers are able to differentiate themselves in crowded markets. The company has excellent routes to market through existing customers and their own extensive sales and distribution network.
  
  The company is keen to build on its current portfolio in the area of specialised polyolefins, and is interested in truly step-change technologies, processes and products that can add value to existing and new markets – licensing, distribution, joint development, investment and acquisition opportunities are all of interest. Innovations should be developed to the stage that they can demonstrate the improved functionality, and should have good intelle Read more

Featured innovation seeker CORPORACIÓN ALIMENTARIA PEÑASANTA

About CORPORACIÓN ALIMENTARIA PEÑASANTA

Areas of interest

Tech requests

Open innovation policy

D-837anonymous company / United Kingdom 420

Submit your solution>> Share tech request>>
Seeking disruptive food packaging, new food ingredients and processing technology for 'food on the go' that is quick to prepare, cook and eat

Food, food technology, food ingredients, packaging, food packaging, soups, broths, vegetable sauces, ready meals, dry foods, dried soups, stock cubes, seasoning powders, UHT, HPP, HPT, UHPH, electric pulses, plasma sterilization, ultra filtration, dehydration, cooking
- Desired outcome
  
  We are working with a large European food products company, specialising in innovative ingredients to ‘help you cook’ – their range of ambient products includes:-
  - ‘Wet’ food (soups, broths, vegetable sauces and ready meals)
  - ‘Dry’ foods and seasoning ingredients (dried soups, stock cubes, seasoning powders)
  These products assist consumers to prepare tasty and nutritious meals that have a natural and traditional ‘home-cooked’ flavour. Whilst these flavours are important to the consumer, the client recognises the consumer’s desire for improvement in both the functionality and sensorial profile of the products and their products. Therefore they are interested to find new technology in the following areas:-
  
  Packaging
  New Ingredients
  Process Technology
  
  Share tech request
  
  Details of the Tech Request :
  
  Packaging
  
  They are aware that busy modern lifestyles have increased the consumption of food “on the go” and consumers prefer products that are easy to carry, to prepare and to consume. Therefore, they are interested in adding value to the packaging of their products and hence are keen to learn of new innovative packaging materials suitable for different cooking / heating processes.
  
  Packaging innovations should be for single-use by the consumer, be sustainable wherever possible, and provide functionality to make the final product a ‘must-buy’ product. In particular:
  
  • Materials that enable microwave cooking, but provide the effect of grill / oven / frying (e.g. for pizzas, meat, etc) - the material could be a part of the product packaging or an added element contained in the packaging that eases the process of cooking
  •Rigid or semi-rigid containers (tray, cup, bowl, jar etc.) or flexible pouches which would help in cooking, especially in the microwave.
  • A plastic substitute for glass, which can withstand 100-120°C for at least 20 minutes, be completely transparent and no more expensive than glass.
  
  Packaging which adds new functionality for increased consumer convenience – e.g. increased portability, assembled packaging with different compartments for easy mixing / preparation, non-burn materials, etc
  • Packaging that removes need for utensils or measuring device – e.g. incorporating dosing measurements for amount of water to add
  • Single use cooking devices such as plastic bags or new innovative container concepts to cook the meal directly and in a more efficient manner – e.g. to provide a cleaner, quick, tastier way to cook
  
  Of special interest is adding value to the ‘dry’ food packaging part of the client’s business:-
  • Sachets to easily mix a dry product with water and cook
  • Novel ideas which permit the conversion of a sachet into a convenient container for eating
  
  New Ingredients
  
  a) Salt replacement products:
  
  Products that can be used as salt replacement in a ratio of at least 50%, i.e. the client is looking to substitute at least 50% of the salt in their current formulations.
  
  b) New food ingredients:
  
  New food ingredients (anything that might be used when preparing food) that provide improved characteristics over standard products, including fresh food (vegetables, meat, chicken, milk and derivatives thereof), new raw materials (species, fats) and dried products (any dried product with special features). Of particular interest would be new ingredients relating to tomatoes, chicken, pesto and pasta. For example:-
  
  - New tastes
  - New organoleptic properties
  - New nutritional properties
  - New health properties (vitamins, lycopene, betacarotene etc)
  - Functional properties.
  - Addition of Omega 3,6,12
  - Palm fats with less than 60% saturated fat.
  - Dry products which look / taste more “natural”.
  - Anti-oxidation products.
  
  Process Technology
  
  a) Sterilzation technology:
  
  Any technology that improves the standard sterilization process, including:
  - Autoclave
  - UHT (Ultra High Temperature)
  - HPP (High Pressures)
  - HPT (High Pressure Temperature)
  - UHPH (Ultra High Pressure Homogenization )
  - Electric pulses, Plasma sterilization, Ultra filtration
  
  b) Dehydration process:
  
  Any technology that improves the dehydration process of fresh products. This needs to either improve on the results obtained using liofilization (currently considered the best technology but very expensive) or be cheaper than liofilization. Read more
D-839anonymous company / Spain 160

Submit your solution>> Share tech request>>
Seeking a Research Centre, Institution or University with an ESP pilot plant (Electrostatic Precipitator) for performing pilot tests under defined conditions.

filtration devices, gas, air, air cleaner, Electrostatic Precipitator
- Desired outcome
  
  Seeking a Research Centre, Institution or University with an ESP pilot plant (Electrostatic Precipitator) for performing pilot tests under defined conditions.Our idea is to establish a contractual relationship with a partner to perform pilot plant trials at their facilities and to get knowledge to improve the performance of ESP`s equipments.
  
  Share tech request
  
  Details of the Tech Request :
  
  Our idea is to establish a contractual relationship with a partner to perform pilot plant trials at their facilities and to get knowledge to improve the performance of ESP`s equipments. Some examples of potential improvements are:
  
  •Rapping strategy (performance vs current, weight, frequency, current control, etc.)
  •Ionization Area and mode (distance between electrodes, plates, etc; type of electrodes specific active area)
  •Air distribution and power supplying, antisneakage systems and deflectors
  
  To summarize, the aim of using a pilot plant test is to assess critical electrical, mechanical and operational elements and parameters for ESP technology. Read more
D-836anonymous company / United Kingdom 218

Submit your solution>> Share tech request>>
Seeking image processing software / algorithms to extract data from male facial photographs (or video stream) and then render simulated grooming styles

image processing software, algorithms, security/ID recognition
- Desired outcome
  
  We are currently seeking image processing software/algorithms that can be used to add different facial hairstyles onto a male face using a series of photographs or a continuous video stream. Although male grooming Apps/software to experiment with facial hairstyles already exist, they are quite basic and provide limited value or choice to the user (e.g. not recognising different hair colour, not scaling the style to the face, or not producing an image recognisable as the user).
  
  Share tech request
  
  Details of the Tech Request :
  
  We are therefore interested in technology that could be incorporated into a mobile application to either extract the relevant data from the face using a camera and/or then render it with a different facial hairstyle (e.g. a beard, sideburns, etc), fitting/adjusting it properly to the face in a few seconds. The resulting image should be close to photo-realistic or show front and both side profiles (e.g. at 45 deg) or multiple views.
  
  We are keen to learn about software/algorithms that can be used in one or both stages of this process, prior to being developed into a full solution. Also of interest are research groups / start-ups / spin-offs with relevant expertise in image processing, who could collaborate on developing a mobile solution that applies their knowledge for this application.
  
  Potential technology could be found in the following sectors: gaming, movie effects, security/ID recognition, training applications, plastic surgery, motion capture, retail fitting, cosmetics, etc. The client expects between 10 and 30 markers to be required for realistic rendering, but we are interested to learn of any ways to achieve the required quality (especially around less distinct markers such as the cheek).
  
  Our client is a multinational provider of male grooming products. They are looking to assist their clients in making the most of their products by helping them virtually experiment with different facial hairstyles. They are keen on finding a solution that can be brought to market in the near future. They have extensive resources and are interested in leveraging them in order to build a successful collaboration with a suitable partner.
  Read more
D-835anonymous company / United Kingdom 247

Submit your solution>> Share tech request>>
Seeking novel materials or surface technologies (e.g. coatings, materials, surface treatments) that can significantly lower the coefficient of friction between the skin surface and a personal care device

low friction coeffecient, innovative coatings, slip agents
- Desired outcome
  
  We are actively searching for novel materials or surface technologies that can significantly lower the coefficient of friction between the skin surface and a personal care device. The ideal solution is one that can be easily integrated, applied or attached to the existing device and is compatible and/or adheres easily to its surface (could be plastic or metal) to create a smooth gliding effect.
  
  Share tech request
  
  Details of the Tech Request :
  
  We are interested in solutions that can last for at least 60 minutes (continuously or cumulatively) before wearing out, or materials which can be replaced or regenerated once the frictionless -property has been exploited. Ideally this wear should be visually identifiable so that the user can be aware of when a replacement is required. We will also consider technologies that would allow the low-friction effect to last the lifetime of the device (~5yrs), providing there was no loss of efficacy.
  
  Our client is a large global manufacturing company that specialises in high-quality personal care products. They would like a solution that can be feasibly adapted or easily productised to complement their existing range of validated technologies. We are therefore interested in early stage developments preferably with proof of concept established, as well as solutions that are close to entering or already in the market. We would also consider technologies from sectors where specific testing may not have been carried out on skin, but the resulting material is not known to cause adverse effects. Read more

Featured innovation seeker Reckitt Benckiser

About Reckitt Benckiser

Areas of interest

Tech requests

Open innovation policy

D-679anonymous company / Brazil 2149

Submit your solution>> Share tech request>>
Seeking technologies / approaches to deliver preventative care and protection against common environmental hazards in the environment

prevent, health, skin, body, fabric, protection, air, environment, cleaning, repellency, barrier.
- Desired outcome
  
  Suitable technologies should provide tangible benefits in terms of health, hygiene or physical well-being as well as delivering a higher emotional feeling of security, protection and reassurance. They will reinforce the consumers’ desire to make a conscious effort to improve their overall sense of wellbeing in ‘doing the right thing’ for themselves and their family.
  
  Potential ‘hits’ would include chemical additives that could confer additional benefits or physical devices / processes that have a meaningful local effect on the personal or indoor managed environment. These would require at least a basic level of supporting evidence of performance / efficacy. Appropriate technology solutions should ideally be readily incorporated into everyday routines and activities such as washing, personal hygiene, skin care and domestic cleaning.
  
  Large multinational organisation, with presence in different countries around the world. We manufacture and comercialize several well known brands in the market. More than 25,000 employees and large investment in Research and Development . . . ..
  
  Share tech request
  
  Details of the Tech Request :
  
  Three areas of particular interest have been identified:
  
  1) Air Quality Management (in the home, in the office, on the move, in public spaces)
  
  Approaches may include general ‘air cleaning’ (i.e. removal of undesirable agents within an enclosed space such as a living room or vehicle) or more personal approaches such as prevention or protection against inhalation / ingestion or contamination of individuals.
  Examples:-
  
  - airborne particulate suppression – sprays, devices, industrial processes?
  - dust / smoke / allergen / odour / pollen control
  - mould / fungal spore removal (related to high humidity environments)
  - airborne bacteria / virus removal
  - absorbents, scavengers and neutralization systems
  
  2) Fabric Treatments (as a means of delivering health / well-being claims and benefits to individuals rather than simply for fabric protection) including functional clothing, upholstery, bedding, and carpet treatments.
  
  Examples:-
  
  - antimicrobial fabric protection during use (e.g. post-wash residual protection)
  - particulate / dirt repellency
  - mould / mildew protection (during drying, storage and wear)
  - odour / allergen control treatments
  - pest repellency
  - skin benefits that can be delivered via fabric treatment
  (e.g. moisturizing, smoothness – see Cognis ‘skin-via-fabric’ approach)
  
  3) Skin / Body Treatments (including hair / scalp, eye, feet and compromised (but intact) skin)
  
  Examples:-
  
  - particulate / dirt repellency (esp. for shampoo / hair care treatments)
  - barrier protection for cracked, dry skin
  - fragile skin treatments (esp. for elderly, thinning skin)
  - eye /nose symptom relief from urban congestion / pollution
  
  To identify a range of technologies / approaches to deliver preventative care and protection against common environmental hazards in the urban environment.
  
  Air Quality Management (in the home, in the office, on the move, in public spaces)
  
  Fabric Treatments (as a means of delivering health / well-being claims and benefits to individuals rather than simply for fabric protection) including functional clothing, upholstery, bedding, and carpet treatments.
  
  Skin / Body Treatments (including hair / scalp, eye, feet and compromised (but intact) skin) Read more
D-832IPEB CONSULTING / Cameroon 291

Submit your solution>> Share tech request>>
Seeking for partner to extend an engineering company in Africa (particularly in Cameroon) mainly for Process engineering; industrial plant sizing; R&D projects;production management, quality control

Industrial process. food production. plants sizing. production management. industrial engineering
- Desired outcome
  
  Solutions presented should help us develop and extend the services of our engineering compagny that are mainly: Process engineering, R&D projects, quality control, industrial plant sizing, production management. The solution can be a partnership that can lead to a branded consulting company in the region, related to industrial process engineering considering. The needs to be consider concern sizing and simulation softwares, support to industrial implementation and management systems implementation
  
  Share tech request
  
  Details of the Tech Request :
  
  Solutions presented should consider that mainy SMEs in Cameroon (Africa in general) need, to be competitive, industrial sizing and management that meet international standards. There is a real need in all aspects of the production to ensure a standad production. It should be noted that there is a wide range of agricutural product that can be processed and some of them can be seen as process challenges. Read more
D-802anonymous company / United Kingdom 920

Submit your solution>> Share tech request>>
Seeking novel technologies or devices with proven or provable efficacy that assist in helping babies sleep

monitoring devices with feedback, infant sleep aids
- Desired outcome
  
  We are actively seeking novel technologies or devices with proven or provable efficacy that assist in “helping babies sleep”. This solution is aimed at infants under 3 years old (primarily 0-18 months) whose erratic sleep patterns affect both their sleep and that of their parents. There are a variety of products commercially available with claims of improving infant sleeping behaviour including special toys, light and sound based solutions; however these assertions are often unsubstantiated and our client is specifically interested in technology that delivers a solution proven and endorsed by experts (e.g. paediatrician, mid-wife, etc).
  
  Share tech request
  
  Details of the Tech Request :
  
  Devices could be relevant for any of the multiple development stages that infants go through, and could be to encourage the infant to fall asleep, as well as return to sleep once disturbed. Products that include digital connectivity are of particular interest – e.g. using monitoring to guide the parent with intelligent decision making to improve the sleep of the child. Current devices are not generally ‘intelligent’, applying the solution irrespective of the infant’s state – solutions that can monitor multiple parameters of sleep patterns and behaviour, give feedback to the parent (e.g. via smartphone) and then apply a solution in response to that state would be of key interest. Research / clinical data on infant sleep that could be used with proprietary algorithms to control devices is also of interest, as are technologies to apply proven methodology and support parents in the execution (i.e. not just a book coaching the method).
  
  Our client is a multinational manufacturer of clinically tested products for infants and is keen to find a technology that can be easily or readily adapted into their product range. We are therefore interested in solutions that are either already on the market, close to entering the market or at a fairly late stage of development where proof of concept has been established. Read more
D-816anonymous company / Spain 896

Submit your solution>> Share tech request>>
Seeking an optimization Algorithm for standardization of catalogue of products and clustering them according to their characteristics.

artificial intelligence, algorithms, algorithm, C#, NET, software engineers, software engineering, enterprise software, Software, programming computer software, semantic matching, semantic software, open source
- Desired outcome
  
  Given a big list of products with their characteristics, the algorithm should calculate the minimum clusters, grouping the product when possible and minimizing the cost of such clusters. Obviously, despite of the size of the problem, the algorithm should be able to find a solution in a sensible period of time. Each product will have a set of characteristics and it will be possible to merge it with other if both are compatible meeting a set of constraints. For each couple of products is necessary to analyze if they are compatible respecting the compatibility rules for each of their parameters and the cost of the merger. Every time two products are merged, the new one will be more restricted, so it implies to be more expensive to make (of course, the standardization will have other benefits, larger than the costs of the merger and out of the scope of the problem). The input of the algorithm would be: product 1, product 2, product 3, product 4… and the output: cluster1 (product1, product2, product3 with cost X) cluster 2 (product 4 with cost Y).
  
  Share tech request
  
  Details of the Tech Request :
  
  Given two products p1 and p2, both the compatibility of the merger and its cost, it has already been defined. It is important to remark the complexity of the calculation due to its dynamism. Every time two formats are merged, it is generated a new one. This new format can be grouped with the rest of products, so depending on the order of the clustering the solution can be different. It is not possible to study all the possible solutions, hence it is necessary some kind of artificial intelligence technique to reduce the search space of potential solutions to figure out the problem calculating the solution (clustering of products) with minimum cost. Read more

Featured innovation seeker Air Products and Chemicals

About Air Products and Chemicals

Areas of interest

Tech requests

Open innovation policy

D-766anonymous company / United Kingdom 1437

Submit your solution>> Share tech request>>
Seeking: Enhanced Foam Generation through Physical/Mechanical Routes

foam, foam generation, packaging technologies, packaging, household cleaning, surfactant, Surfactants, squeezable bottles, aerosols cans, aerosol devices, foam generation devices
- Desired outcome
  
  We are seeking cost effective physical/mechanical technologies for enhanced foam generation and stability. Technologies that are able to generate high volume/quantity of foam from low concentration surfactant based formulations are especially of interest. Packaging Technologies that alter the ingress of water/fluid dynamics in a surfactant containing cage or that impact the entrapment of air in a squeezable bottle or aerosol would be of interest as would other novel foam generating devices/packaging mechanisms. Technology must be safe for consumer use.
  
  Share tech request
  
  Details of the Tech Request :
  
  Foam is a key indicator of efficacy and performance for a range of consumer pharmaceutical and food products. The amount of foam generated, the foam quality, stability etc are all key foam characteristics that consumers tend to associate with enhanced performance such as cleaning. Foams also have additional functional benefits, such as effective active or drug delivery due to enhanced skin penetration.
  
  One of the key challenges in the consumer area is the generation of adequate quantities of foam with desired characteristics at very low concentrations. Many of the consumer goods, especially in the household cleaning sector are designed to provide adequate cleaning efficacy at very low total dissolved concentrations in an aqueous environment. Although cleaning is usually achieved at these low concentrations, other characteristics which are linked to the overall consumer product experience, such as foam quantity/quality are not adequately achieved.
  
  The key aim of this technology need is therefore to identify potential physical/mechanical based technologies which will enhance the overall consumer experience of the product through generation of high quantities of foam from low to medium concentration surfactant based formulations. Read more
D-828Richard Percival / United States 307

Submit your solution>> Share tech request>>
Seeking Electronic Modular solutions that are ready to Go to Market in North America.

wireless, sensors, energy harvesting, energy management, actuators, security, Encryption, Bluetooth
- Desired outcome
  
  My partners in North America create local e-commerce websites to fulfill orders for your product from stock, They address and call on buyers throughout North America, and add value by selling your solutions including software customization and localization, and bundle your solution together with complementary products from their linecard. They deal exclusively with professional equipment manufacturers, B2B solution providers and B2C merchants in niche technology markets. They act as your Value Added Stocking Representative.
  
  The Key Performance Indicator for a successful partnership is a growing flow of your packaged solution products through their channel, a growing revenue stream back to you as designer/originator/contract manufacturer, and a reasonable profit margin after promotional fixed and variable costs quarter to quarter.
  
  Share tech request
  
  Details of the Tech Request :
  
  European technology incubators, creative partnerships, and academic research and development institutions generate a stream of ideas which require a path to market in North America. Our job is to select the products from among those on offer with the best chance of filling an unmet need and generate a growing profit. We introduce your product to specialist selling channels, set up a dialog and bridge the cultural gap to ensure that expectations are met on all sides. Read more
D-827ARIES Ingeniería y Sistemas / Spain 322

Submit your solution>> Share tech request>>
Seeking High Power density BLDC electrical motors and controller

brushless DC motors
- Desired outcome
  
  Development or purchse of a High density brushless DC motors and their controllers. New R+D project could also be needed if any of the solutions are satisfactory. Either direct purchase if the product satisfy requirements technically. These motors will be installed on an special vehicle.
  
  Share tech request
  
  Details of the Tech Request :
  
  I am looking for special brushless DC motors, of about 4 KW nominal power and small size max 80 mm diameter, for special vehicle application. if you have the product or thecnology to develop, I am interested.
  
  Nominal power 4 KW
  peak power 8 kW
  max speed about 6000 rpm
  DC 48 VDC power supply (other could be considered)
  electronic control for speed and torque, master-slave architecture could be applicable. Read more
D-780anonymous company / United Kingdom 3178

Submit your solution>> Share tech request>>
Seeking: Materials and/or processes that allow the maintenance/reduction of temperature of liquids in metal or glass containers

metal containers, glass containers, glass bottles, metal cans, packaging, Beverage, beverages, aerogels, cooling hydrogels, foaming polymers, Coatings
- Desired outcome
  
  A material that can be applied via printing to ensure the temperature of the beverage is kept below 10 degrees whilst being consumed.
  
  We are seeking material and process technologies that will insulate against heat gain or actively reduce temperature of liquids contained in glass bottles or metal cans. Solutions (e.g. phase change/insulation materials etc) that can easily be coated on to the inside or outside of the bottle or cans on a fast moving production line, whilst ensuring the premium look of the end product, would be of interest. Processes that enable the printing, coating, spraying of thick foam like or phase change materials are also of interest.
  
  Share tech request
  
  Details of the Tech Request :
  
  Background:
  
  Beverages when served cold quickly heat up during consumption as heat is transferred from the hand to the liquid container. We would like to enable beverages to stay colder longer during consumption either through minimizing heat gain by the liquid or actively reducing the temperature of the liquid. This can be achieved via a variety of solutions however we are focusing on phase change and insulation materials and/or process that enable the coating of the those materials on metal or glass.
  
  Constraints:
  
  - Beverage to stay under 10 degrees Celsius for 15 minutes whilst being handled
  - Material must not be more than 250 microns thick to have insulating effect
  - Material must look good and ideally enable printing
  - Food grade if an internal solution
  - Withstand pasteurization Read more

Featured innovation seeker COPCISA

About COPCISA

Areas of interest

Tech requests

Open innovation policy

D-829anonymous company / United Kingdom 419

Submit your solution>> Share tech request>>
Seeking: Ways to relieve stuffy nose by adding novel sensation to saline sprays and washes

stuffy nose, nasal, saline sprays, menthol, Eucalyptus, lavender, heather, aloe vera, natural plant extracts, ingredients, OTC, pharma
- Desired outcome
  
  We would like to find new sensations for saline sprays and washes that are used to relieve stuffy nose and to moisturize dry nasal passages. For example, additives such as eucalyptus or sesame oil that are not drugs can produce sensations of coolness or warmth that enhance the experience of using a saline spray.
  
  Share tech request
  
  Details of the Tech Request :
  
  Non-drug saline sprays and nasal washes are popular for relief of stuffy nose and to help moisturize dry nasal passages. However, saline solutions on the market are very similar because of their non-drug nature and similar pH.
  
  We would like to find new sensations (cooling, calming, softening, or warming, etc.) for saline sprays and washes that help effect relief for stuffy nose, or that make the experience of moisturizing gentler. We'd like to make nighttime breathing easier. Read more
D-680anonymous company / United Kingdom 1454

Submit your solution>> Share tech request>>
Seeking: Natural Petcare Food Ingredients and Supplements for Preventing Infestations by Fleas & Ticks

ticks, fleas, petcare, cats, dogs
- Desired outcome
  
  We are seeking cost effective food ingredients or food supplements that will prevent infestations of fleas and ticks on dogs and cats. The solution should also prevent the biting of sand flies or phlebotomus, that are vectors of leishmania. The food ingredient/supplement must be safe for consumption by dogs and cats and must be derived from natural sources.
  
  Food ingredients or supplements that inhibit the growth /development of flea and tick eggs/larvae or repels adult fleas and ticks from dogs and cats or causes death in adult flea and tick populations would all be of interest. Pharmaceutical or therapeutic technologies and actives are not of interest.
  
  Share tech request
  
  Details of the Tech Request :
  
  The field of use will be in the pet food industrial sector. Desired outcome will be cost effective natural food ingredients or food supplements that will prevent the infestation by fleas and ticks on dogs and cats.
  
  Background:
  
  The infestation by fleas and ticks on dogs and cats is a major cause of concern for pet owners around the world. Although there are various technologies for either preventing fleas and ticks (insect development/growth inhibitors) or killing adult flea and tick populations, these are usually pharmaceutical/therapeutic solutions that can be taken orally or harsh chemicals/topical drugs that are applied to the skin of dogs and cats. These can potentially cause various side effects and for the various topical solutions can also present application and retention ifficulties. The ability to prevent infestations of fleas and ticks through natural food ingredients or food supplements would therefore provide a new complimentary, safe and effective route to control this infestation problem. We therefore seek natural food ingredients and or supplements in order to achieve this.
  
  Constraints
  
  -Ingredients/supplements must be palatable to dogs/cats
  -Ingredient/supplement must be stable and not degrade during processing in an extruder at high
  temperatures (100C for 20 seconds) and high pressure.
  -Non toxic and safe for consumption by dogs/cats
  -Efficacy data in dogs and cats is highly desirable.
  -Efficacy data in other farm animals or in-vitro data is also acceptable.
  -Suitable for large scale production
  -Ingredient must be registered/listed in the EU as a
  food ingredient. Read more
D-826SelChem India / India 295

Submit your solution>> Share tech request>>
Seeking technology/ technical partner for UV cured automotive refinish primer and body filler for manufacture and marketing in India.

primer, body filler, UV cured
- Desired outcome
  
  Looking for easy to use, reliable, UV cured primer-surfacer & car-body filler offering same or better end properties as conventional products with added advantage in terms of faster drying/setting, energy saving, no pot-life issues, environmentally friendly etc.
  Should be easily adoptable by small and large garages without need for large investments or specialsed training for applicators. Application and curing methods should be easy to implement at the garage level.
  
  Share tech request
  
  Details of the Tech Request :
  
  Solutions provided should be proven and based upon commercially established technology, offering distinct advantages over conventional products used by car body repair shops.
  Conventional car-body fillers are usually based on 2K technology, with short pot-life, using hazardous ingredients like benzoly peroxide etc.
  UV cured technology should overcome such constraints and offer added advantages. Read more
D-825Advanced Marker Discovery, S.L. / Spain 547

Submit your solution>> Share tech request>>
Seeking for biomarkers in oncology

cancer, oncology, predictive, prognosis, Diagnosis, biomarker
- Desired outcome
  
  Amadix is seeking for biomarkers in the field of oncology. These biomarkers can be either diagnostic or screening or pronostic or predictive for response to treatment or for monitorizing or for toxicity. The mainstream characteristcs that Amadix evaluates in a project are: the clinical need, the scientific data, the patent protection or opportunity fo intelectual property and the suitability of the approach for development.
  
  Share tech request
  
  Details of the Tech Request :
  
  Advanced Marker Discovery, S.L. (“Amadix”) is a development company for diagnostic tools (kits, markers, assays etc.). The Company identifies, evaluates and in-licenses breakthrough discoveries in cancer diagnosis and develops them into marketable products. This is done by leveraging resources through collaborations and via premier Contract Research Organizations. Read more

Featured innovation seeker Orange R&D Spain

About Orange R&D Spain

Areas of interest

Tech requests

Open innovation policy

D-670anonymous company / United Kingdom 2595

Submit your solution>> Share tech request>>
Seeking enhanced strengthening and stability of cellulose fibre based paper board

enhanced strengthening, cellulose fibres,
- Desired outcome
  
  We are seeking cost effective material or process technologies that will effectively increase the number of times cellulose based fibres can be recycled. Technologies which achieve this through no/minimal addition of virgin fibres at each recycling stage are desired. Any process technologies should require low capital investment and should be accommodated in modifications to existing equipment.
  
  Share tech request
  
  Details of the Tech Request :
  
  The environmental footprint of paper and board based packaging for consumer goods, foods etc is extensive. In order to effectively increase the environmental sustainability of such products it is therefore
  essential to significantly impact the recycling potential of paper/board based packaging. Currently cellulose based fibres can only be recycled 6-8 times, after which the fibre length and properties are too significantly
  impacted for any further re-use. Technologies are therefore required that will enhance the recycling potential of such fibres. Read more
D-706anonymous company / United States 2131

Submit your solution>> Share tech request>>
Seeking cryogenic processes for pelletising food and pharmaceutical products

Depositing technology, Food, pharmaceutical products, portioning of liquids, pellets
- Desired outcome
  
  Technology to produce pellets of food, or pharmaceutical, products that would then allow freezing in individual portions.
  
  Multi billion revenue multinational company operating globally in the energy and chemical sectors with around 25000 employees worldwide.
  
  Share tech request
  
  Details of the Tech Request :
  
  A depositing technology that can be used to form both liquid food and liquid pharmaceutical products so that further processing as individual parts would be possible. Individual depositing capability is important and with size being anything from 5mm spheres to 25mm diameter pucks. Any technology capable of depositing and/or portioning products would be considered. Equipment needs to be suitable for either food or pharmaceutical applications so having the ability to easily hygiene is important. Read more

1 2 3 4 5 ... 10

3rd Annual Alliance Management for Open Innovation in Pharma

Strategic alliances for pharma innovation

The 6th ISPIM Innovation Symposium – Innovation in the Asian Century

Technology requests browser

Technology requests browser

colour protection, stain removers, antilime scale, Surfactants, Enzymes, Sheets,

volatile silicone., not greasy, sprayable, combability, Solubility, Shine, conditioner, 3 phases

It should allow to pass from a 2 phase conditioner water/silicones (70/30) to a 3 phase one. It should keep the conditioning power. It should increase hair's shine. It should be able to be used in cosmetics. It should be safe for use in contact with human skin. Read more

natural active ingredien, aerosol, repelling, killing, trigger spray, textiles, acaricide, Dust mite

Formulation, for a trigger spray delivery system, to kill or repell Dust mites. The formulation needs to be completly developed. The way of action is desired to be as natural as possible. Ideally using natural active ingredeints or mechanical actions to kill the dust mites.

Needs to be odourless and able to apply on textiles (not to stain textiles). The formulation needs to be marketed in European countries; some information in oredr to register in national legislations will be needed. It will be good if the formulation is also complian with BPR. Read more

thermal protection, non-combustible, firewall, refractory, fireproof, flameproof, Fire resistant

protease, wool, Pilling, pills, lint

hair, pigments, phosphorescent, fluorescent, Shine

We want to make a cosmetic product that allows hair shine bright in the dark due to the addition of fluorescent and/or phosphorescent pigments.

water repellent, Waterproof, hair, fibers, chemical, Chemistry, skin, Textile, cosmetics

It should repel water or make a fiber become waterproof. It should be soluble in an aqueous system preferibly, or, otherwise, in an anhidrous system. It should be safe for use in contact with human skin. Read more

Nanotechnology, evaporation, smell, evaporation smell, low evaporation rate, remote signature

A technological cooperation for integrate the technologies in finished industrial products made by kind of plastic. A list of the relevant technological solution, the maturity of the technology, present application if there any, and point of contacts to make the next step are needed.

ammonia chelating., odour reduction, odour capture, ammonium, ammonia, odour masking, Odour control

It should remove or noteaceably reduce ammonia smell in personal care products. It should be soluble in an aqueous system preferibly, or, otherwise, in an anhidrous system. It should be able to be used in cosmetics. It should be safe for use in contact with human skin. Read more

sputum, Blood, Point-of-Care, PCR, nucleic acid amplification, viral, bacteria

Solutions pesented should be economical, easy to implement, not requiring significant capital expenditure on specialized instruments. Technologies not fully validated and requiring development are also of interest. Open to any kind of business arrangement. Read more

bioplastics, plastics, EVA, EBA, Polyolefins, polyolefin, ethylene vinyl acetate, ethylene butyl acrylate, Polyethylene, polypropylene, LDPE, HDPE, packaging

Food, food technology, food ingredients, packaging, food packaging, soups, broths, vegetable sauces, ready meals, dry foods, dried soups, stock cubes, seasoning powders, UHT, HPP, HPT, UHPH, electric pulses, plasma sterilization, ultra filtration, dehydration, cooking

filtration devices, gas, air, air cleaner, Electrostatic Precipitator

image processing software, algorithms, security/ID recognition

low friction coeffecient, innovative coatings, slip agents

prevent, health, skin, body, fabric, protection, air, environment, cleaning, repellency, barrier.

monitoring devices with feedback, infant sleep aids

artificial intelligence, algorithms, algorithm, C#, NET, software engineers, software engineering, enterprise software, Software, programming computer software, semantic matching, semantic software, open source

foam, foam generation, packaging technologies, packaging, household cleaning, surfactant, Surfactants, squeezable bottles, aerosols cans, aerosol devices, foam generation devices

wireless, sensors, energy harvesting, energy management, actuators, security, Encryption, Bluetooth

Development or purchse of a High density brushless DC motors and their controllers. New R+D project could also be needed if any of the solutions are satisfactory. Either direct purchase if the product satisfy requirements technically. These motors will be installed on an special vehicle.

metal containers, glass containers, glass bottles, metal cans, packaging, Beverage, beverages, aerogels, cooling hydrogels, foaming polymers, Coatings

stuffy nose, nasal, saline sprays, menthol, Eucalyptus, lavender, heather, aloe vera, natural plant extracts, ingredients, OTC, pharma

ticks, fleas, petcare, cats, dogs

primer, body filler, UV cured

cancer, oncology, predictive, prognosis, Diagnosis, biomarker

enhanced strengthening, cellulose fibres,

Depositing technology, Food, pharmaceutical products, portioning of liquids, pellets

Technology to produce pellets of food, or pharmaceutical, products that would then allow freezing in individual portions. Multi billion revenue multinational company operating globally in the energy and chemical sectors with around 25000 employees worldwide.

New user (free registration)

Registered user

It should allow to pass from a 2 phase conditioner water/silicones (70/30) to a 3 phase one.
It should keep the conditioning power.
It should increase hair's shine.
It should be able to be used in cosmetics.
It should be safe for use in contact with human skin. Read more

Formulation, for a trigger spray delivery system, to kill or repell Dust mites.
The formulation needs to be completly developed. The way of action is desired to be as natural as possible. Ideally using natural active ingredeints or mechanical actions to kill the dust mites.

Needs to be odourless and able to apply on textiles (not to stain textiles).
The formulation needs to be marketed in European countries; some information in oredr to register in national legislations will be needed.
It will be good if the formulation is also complian with BPR.
Read more

It should repel water or make a fiber become waterproof.
It should be soluble in an aqueous system preferibly, or, otherwise, in an anhidrous system.
It should be safe for use in contact with human skin. Read more

It should remove or noteaceably reduce ammonia smell in personal care products.
It should be soluble in an aqueous system preferibly, or, otherwise, in an anhidrous system.
It should be able to be used in cosmetics.
It should be safe for use in contact with human skin. Read more

Technology to produce pellets of food, or pharmaceutical, products that would then allow freezing in individual portions.

Multi billion revenue multinational company operating globally in the energy and chemical sectors with around 25000 employees worldwide.